FleetPride 2019 National Parts Catalog

INTEGRATED PLATE MOUNT

19

FOR ANGLE MOUNT

FOOT MOUNT

WITH ANGLE MOUNT

FIFTH WHEEL ASSEMBLY

NOTE: For replacement mounting brackets, see Parts Catalog XL-FW10081PM

FIFTH WHEEL ASSEMBLY PART NUMBER GUIDE “New” Standard Duty Fifth Wheel Assembly Part Numbers FW 35 X X XX X X XX*

FIFTH WHEEL ASSEMBLY PART NUMBER GUIDE — SAF HOLLAND ®

Travel

Option Code**

Release Handle

00 = Stationary 12 = 12” 18 = 18” 24 = 24” 36 = 36” 48 = 48” 06 = 6” No-Tilt 18 = 18“ No-Tilt 30 = 30” No-Tilt 42 = 42” No-Tilt

General HOLLAND prefix indicating complete Fifth Wheel Assembly

Fifth Wheel*** Series 35 = FW35 Series 33 = FW33 Series Low Lube 31 = FW31 Series NoLube 17 = FW17 Series 16 = FW16 Series LowLube AL = FWAL Series Low Lube

00 = No Option 02 = Manual Secondary Lock 24 = Drilled & Tapped for Auto Lube

L = Left-Hand (Road-Side) R = Right-Hand (Curb-Side)

28 = Dolly Release Handle 86 = Air Release Top Plate 1L = Standard ELI-te 1M = ELI-te with Air Release

Mounting Style

Angles

Standard Duty Sliders A = Outboard (1 pc. Tie-Bar) B = Inboard (Serrated 3 pc. Tie-Bar) C = Inboard (Straight 3 pc. Tie-Bar) (DTNA air fitting) F = Outboard (1 pc. Tie-Bar) (DTNA Air Fitting) G = Outboard (3 pc. Tie-Bar ) H = Inboard (1 pc. Tie-Bar for PACCAR) J = Outboard (1 pc. Tie-Bar for PACCAR) L = Inboard (+40K Suspension-PACCAR) M = Outboard (+40K Suspension-PACCAR)

No Angle Mounting Systems W = Aftermarket Inboard No-Tilt & FW33 Komp ( Serrated Edge) X = Outboard Slider or Inboard Slider w/o angles or Stationary w/o Angles Y = Outboard No-Tilt Z = OEM Inboard No-Tilt (Straight Edge)

1N = ELI-te with Manual Secondary 1P = ELI-te with Option 24 Auto Lube 1R = ELI-te with Option 14 Lube Fittings 1S = ELI-te with No-Tilt 1V = Pre-Drilled for ELI-te 1W = Pre-Drilled for ELI-te with Air Release 1X = ELI-te with Greased Lock Pins 1Y = ELI-te with Air Control Module

Mounting Angle Frame Width A = 33.25" B = 33.38" C = 33.50" D = 33.62" E = 33.75" F = 33.88" G = 34.00" H = 34.12" J = 34.25" K = 34.38" L = 34.50" The following frame widths are available only on “V” Stationaries

HOW TO MEASURE FIFTH WHEEL MOUNTING HEIGHT

Standard Duty Stationaries Z= Integrated Plate Mount Y = Foot Mount X = Bracket Castings Only (No Angle or Base Plate)

NOTE: For FW0070 assembly part number, please contact Customer Service for assistance 800.876.3929

V = Brackets with 5” Vertical Leg Angle W = Brackets with 4" Vertical Leg Angle

Height (approx.) 6 = 6" (Stationary Only)

Specialty Mounting Systems N = No-Tilt

STATIONARY

Height Measured from Face to Frame Rail

M = 34.62” N = 34.75” P = 34.88” Q = 35.00” R = 35.12” S = 35.25” T = 35.38” U = 35.50” V = 35.62“ W = 35.75”

7 = 7" 8 = 8" 9 = 9" 0 = 10”

NOTE: No-Tilt conversion kits available. Please contact Customer Service for assistance 800.876.3929

1 = 11” (Komp Only) 2 = 12” (Komp Only) 3 = 13” (Komp Only)

SLIDER

*Please note that no "dashes" are used for the complete fifth wheel assembly new part number. **Please note that not all options are available on every top plate; Multiple option combinations are available. ***Please note that ELI-te is for FW35, FW33 and FW31 only.

SAF-HOLLAND, Inc. 888.396.6501 Fax 800.356.3929

File Name: "New - Standard Duty Fifth Wheel Part Number Map_MASTER_16Jan17.ai/pdf"

safholland.com

SAF-HOLLAND Canada Limited 519.537.3494 Fax 800.565.7753 Western Canada 604.574.7491 Fax 604.574.0244

824

Made with FlippingBook Annual report