The Klass AFRDI Certificate provides assurance for commercial buyers. A heavy duty office desk designed for demanding daily use in business fitouts.
Certificate No.
18533/1
Approved by Furntech-AFRDI
Nominal Expiry*
*Check website www.furntech.org.au for current certification status
21 May 2028
Product name: Klass Height Adjustable Desk
OLG Office Pty Ltd
Company:
Sit-to-stand desk
Product type:
1 person per worktop
Seats:
DS2.3
Product ID:
DS4.3
General safety
✓
Certified for:
Strength and durability
✓
Stability
✓
1
Dimensions
Compliant
Minor variations
x Non-compliant
✓
Note 1: Minimum worktop height threshold of desk is 625 mm instead
of 620 mm.
AFRDI Blue Tick certification criteria are based on AS/NZS 4442:2018 Office
desks, office workstations and office tables intended to be used as office desks,
but may include additional requirements and variations as deemed appropriate
by Furntech-AFRDI.
Products will be certified at minimum for general safety, strength and
durability, and stability. Those certified with minor variations have a limited
number of dimensions a small amount outside those specified in the standard.
Dimensionally non-compliant products should be evaluated in relation to their
intended application.
Electrical components, if present, have not been tested or certified by
Furntech-AFRDI to any electrical standard or evaluated against any electrical
regulation.
Testing and evaluation was conducted on the specified unit/s, or selected
samples from the range, such that in the opinion of Furntech-AFRDI all items (as
tabulated below) should perform satisfactorily in relation to the certification
criteria. Certification is limited to the features and options depicted and listed
on this certificate.
The supplier having agreed to maintain the compliance of the product and to
submit to retesting and auditing as appropriate, the Australasian Furnishing
Research and Development Institute hereby certifies the range (as specified
below) under the AFRDI Blue Tick Product Certification Program.
Certification is valid until the expiry date but may be suspended, revoked or
renewed .
18533-1_260513_ct.docx
* This certificate replaces 17770/1
This certificate is not valid unless reproduced in full – Page 1 of 3
Range Details
Primary worktop
Material:
Particle board
Designation:
Melteca Standard
Manufacturer:
Laminex New Zealand
DS2.3
Number of Primary worktops:
One
Shape:
Rectangular
Dimensions (L,W,T):
1800 x 750 x 25 mm] [single and mixed tasks]*
DS4.3
Number of Primary worktops:
Two positioned back to back
Shape:
Rectangular
Dimensions (L,W,T):
1800 x 750 x 25 mm] [single and mixed tasks]*
*defined as per AS/NZS 4442
Height adjustment
Height adjustment
Continuous user adjustable
Height range:
625 to 1275 mm
Height adjustment mechanism
Electric
Location of unit’s electric motors:
One in each leg
Electric motor manufacturer:
OLG specified
Electric motor’s control box
OLG specified
manufacturer:
Legs
Profile
Rectangular, and round
Feet, legs and frame
Standard and QuickRise options
18533-1_260513_ct.docx
* This certificate replaces 17770/1
This certificate is not valid unless reproduced in full – Page 2 of 3
18533-1_260513_ct.docx
* This certificate replaces 17770/1
This certificate is not valid unless reproduced in full – Page 3 of 3
Page 1 Page 2 Page 3Made with FlippingBook - Share PDF online