CARE & MAINTENANCE
WASHING INSTRUCTIONS
RECOMMENDATIONS TO PROLONG THE LIFE OF YOUR GARMENTS!
QUICK TIPS
COTTON DRILL
WARM MACHINE WASH DO NOT WASH OVER 60˚C
Always follow instructions on all care labels attached to the garment. Dry and store safety hi vis garments away from sources of heat and light. Inspect regularly for garment serviceability, excessive fading, mechanically damaged components or dirt/soiling.
WASH GARMENT SEPARATELY BEFORE FIRST USE WASH GARMENT WITH SIMILAR COLOURS AND GARMENTS FOR CONSECUTIVE WASHES. DO NOT USE BLEACH OR WHITENERS THIS INCLUDES SOAKERS OR DOMESTIC DETERGENTS CONTAINING WHITENERS
LINE DRY IN SHADE AVOIDING PROLONGED TIME IN SUNLIGHT REDUCES COLOUR FADING
SPECIAL NOTES
MAY BE TUMBLE DRIED ON WARM SETTING - FOLLOW GARMENTS CARE LABEL AND INSTRUCTIONS.
If any of the above is not followed, it may result in garment non-conformance to specified Australian Standards and therefore should be replaced. We recommend a critical garment examination every 3-6 months intervals.
HOT IRON ON REVERSED SIDE DO NOT IRON TAPE IF APPLICABLE
GARMENTS TRIMS
Just like fabrics, components like reflective tape, polyester patches and other trims require care.
Here are some extra tips: Where possible, you should wash the garment inside out. This helps protect trims for any abrasion and avoid any bleeding of colours. Do not use fabric softener on reflective tape garments. Excessive amounts of fabric softener may significantly damage the reflectivity of the tape.
Excessive drying on domestic dryers will damage reflective tape, garment stitching. Where possible line dry.
63
wsworkwear.com.au
Made with FlippingBook - Online Brochure Maker