7” VARIABLE SPEED POLISHER KIT with a FREE 4-1/2” ANGLE GRINDER
2000 LUMEN LED CORDED/CORDLESS UNDERHOOD LIGHT with $45 MAIL-IN REBATE
Specifications: • No Load Speed (variable speed): 0 - 3,200 RPM • Includes pad alignment/centering sleeve
• Sanding Disc: 7” • Wool Bonnet: 7”
• Spindle Thread: 5/8” - 11 UNC • Overall Length: 18-1/2”
• Amps: 10
$349.95 MAK-9237CX2
Features: 40” light bar provides 2000 lumens of bright light for maximum area illumination • UL/cUL listed 8.4V, 2.2 Amp charger with 25 ft. 18/2 SJTOW cord • Run Time: up to 2 hours (high), up to 4 hours (low) • 7.4V, 5,200mAh Li-ion battery • Hooks extend 55” to 83” ATD-80357. .................$184.69
$125.00 VALUE MAK-9557PB 4-1/2” ANGLE GRINDER
2 -in- 1 Corded & Cordless
MORE POLISHERS ON PAGE 20
MORE LIGHTING PAGES 69-71
9 PC. HVLP SPRAY GUN SET with $40 MAIL-IN REBATE
Promotion is valid April 1 thru June 30, 2023 • Visit www.atdtools.com/literature for rebate form
COMMANDER4000 AUTOMATIC R1234yf & HYBRID RRR MACHINE
Set Includes: • (1) 1.8mm Primer Spray Gun - ATD-6902 • (1) 1.4mm Topcoat Spray Gun - ATD-6901 • (1) 1.0mm Touch-up Spray Gun - ATD-6903
• Wi-Fi Capable • Hose Flushing • Thermal Printer • Cylinder Heater
• (2) 1L Aluminum Cups - ATD-6900-09, ATD-6900-08 Lid for cup • (1) 125cc Stainless Steel Cup - ATD-6900-21, ATD-6900-20 Lid for cup • (1) Locking Pressure Regulator - (0-180 psi, 0-12 BAR) • (1) Paint Gun Filter • Cleaning Kit: (1) Spanner Wrench, (1) Hex Wrench, (1) Brush, (2) Filters
• Auto Oil Discharge • Multiple Languages • Large Analog Gauges • Refrigerant Identifier • Hose Coupler Storage • Refrigerant Database • 6 CFM Vacuum Pump • Self-Diagnostic Check • Low Refrigerant Alarm • Hard Wired Power Cord
$139.99 ATD-6900
• Auto and Manual Air Purge • Vehicle A/C System Flushing • Multi-colored LED Status Bar • On-board Instruction Manual • Auto Filter and Full Tank Alarm • Automatic and Manual Procedures • On-board Unit Conversion Calculator • Solid Durable Wheels with Locking Casters • New Cabinet Design for Increased Air Flow • 8” Color Command Center with Touch Screen • Automatic Vacuum Leak Test: Programmable
MORE PAINT GUNS ON PAGE 16
Promotion is valid April 1 thru June 30, 2023 • Visit www.atdtools.com/literature for rebate form
BUY A PRO SERIES 1000 HEADLAMP HEADLAMP OR A SPORTSMAN 1000 HEADLAMP HEADLAMP GET FREE 1800 mAh RECHARGEABLE BATTERY PACK!
MST-4000.....................................$5,709.95
PRO SERIES 1000 1000 Lumen Wide-Beam LED PRO Rechargeable Headlamp MTI-LBP1000L34CF PRO 1000 - Carbon Fiber........................$73.39
LBP1000-L34CF
Both Headlamps Feature: • 210˚ wide beam, low-profile headband-style
• 35 powerful LEDs that deliver 1000 lumens of ultra bright light • 3400 mAh X-TEND lithium ion USB-C rechargeable battery delivers up to 28 hours of light on low setting and features 5 light modes: high, medium, low, red & pulse for max versatility • Weatherproof rating of IPX5 • Perfect for professional tradesmen and outdoor activities
$24.99 VALUE LBD-LBP1800
SPORTSMAN 1000 1000 Lumen Wide-Beam LED PRO Rechargeable Headlamp with Green Night Mode LED
May 15 through June 30, 2023 Tool Specials D1 Prices are subject to change without notice due to unstable supply chain and shipping costs
LBP1000-L34C
MTI-LBP1000L34C
SPORTSMAN 1000 - Camo......................$76.89
MORE LIGHTING PAGES 69-71
2 D
56 PC. 3/8” DR., SAE & METRIC RATCHET & SOCKET SET
50 PC. 1/4” DR., SAE & MM, RATCHET & SOCKET SET
47 PC. 1/2” DR., SAE & METRIC RATCHET & SOCKET SET
• (11) Deep Well SAE: 1/4”, 3/8”,1/2” 3/4”, 5/16”, 7/16”, 9/16”, 11/16” 13/16”, 7/8” & 15/16” • (12) Standard Length SAE: 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 7/8”, 9/16”, 11/16”, 13/16”,15/16” 3/4” & 1” • (14) Deep Well Metric: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm • (14) Standard Length Metric: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm • (2) Extensions: 3” & 6” • (1) 90-Tooth Ratchet • (1) Universal Joint • (1) Removable inner tray for long-term storage in a steel storage chest
• (11) Standard Length SAE: 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16” & 1-1/8” • (8) Deep Well SAE: 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8” & 15/16” • (15) Standard Length Metric: 10, 11, 12, 13, 14,15, 16, 17, 18, 19, 20, 21, 22, 23 & 24mm • (10) Deep Well Metric: 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm
• (12) Deep Well Metric: 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 & 15mm • (12) Standard Length Metric: 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 & 15mm • (11) Deep Well SAE:1/4”, 3/16”, 5/16”, 7/16”, 3/8”, 9/16”,7/32” 9/32”, 5/32”, 11/32”, 1/2”
9004
9510
9008
$116.39 MPT-48-22-9004
• (2) Extensions: 3”, 5” • (1) 90-Tooth Ratchet
• (10) Standard Length SAE:1/4”, 7/32”, 5/16”, 7/16”, 3/8”, 9/16” 5/32”, 9/32”, 11/32”, 1/2”
$227.69 MPT-48-22-9010
• (2) Extensions: 3” & 6” • (1) 90-Tooth Ratchet • (1) Universal Joint
$184.99 MPT-48-22-9008
28 PC. 1/2” DR., METRIC RATCHET & SOCKET SET
MORE SOCKETS ON PAGES 34-36, 38, 41
40” DROP-ARM CREEPER (81042) WITH A FREE 105 PC. MASTER BIT SET WITH RATCHET (ATD-505) BY MAIL-IN REBATE
• (10) Deep Well: 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm • (15) Standard Length: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23 & 24mm • (2) Extensions: 3”, 5” • (1) 90-Tooth Ratchet $175.79 MPT-48-22-9510
BY MAIL-IN REBATE FREE GIFTS
$123.69 ATD-81042
$22.29 VALUE ATD-505
Promotion runs April 1 thru June 30, 2023 Mail-In Rebate forms available at atdtools.com/literature
20V MAX Lithium-ion grease gun has a powerful motor for pushing 5 oz. per min. of high-flow applications. Features a variable speed trigger for precision, bright LED lights for working in dark spaces, and an anti- debris filter to protect the pump mechanism from dirt and contamination. 20V MAX* LITHIUM-ION GREASE GUN KIT
BDT-DCGG571M1................................. $329.95
$160.00 VALUE DCB205
for full specifications visit https://www.dewalt.com/product/dcgg571m1 WITH A FREE 20V MAX XR LITHIUM ION 5.0AH BATTERY PACK (DCB205)
BUY A 2-1/2 TON ALUMINUM SERVICE JACK (7345B) AND GET A FREE 105 PC. MASTER BIT SET W/RATCHET AND A 5 PC. TELESCOPIC TOOL SET BY MAIL-IN REBATE
5 PC. PRY BAR SET with $25 MAIL-IN REBATE
10 TON END LIFT WITH A FREE ADJUSTABLE HEIGHT MECHANIC’S TRACTOR SEAT •10 Ton capacity achieved at 200 psi air supply • 4” x 6” steel saddles adjust between 36” and 50” widths • Three way air valve for fine lifting and lowering control • Automatic mechanical safety lock engages at five lift heights from 17-1/2” to 50” • Two air control valve fittings (shop air and Schrader valve) • Front swivel caster and two pneumatic rear tires • 13” forward reach (distance from cylinder to saddles)
BY MAIL-IN REBATE FREE GIFTS
Promotion is valid April 1 thru June 30, 2023 Visit www.atdtools.com/literature for rebate form
ATD-319
ATD-505
$368.29 ATD-7345B
$4,049.95 AFF-3598
ATD-7345B
Promotion is valid April 1 thru June 30, 2023 Visit www.atdtools.com/literature for rebate form
Set Includes: • ATD-63912 - 12” pry bar • ATD-63917 - 17” pry bar • ATD-63925 - 25” pry bar • ATD-63931 - 31” pry bar • ATD-63936 - 36” pry bar
4,400 LBS. TRUCK TRANSMISSION JACK WITH A FREE ADJUSTABLE HEIGHT MECHANIC’S TRACTOR SEAT
$99.59 ATD-63905
$175.00 VALUE 57108
•Min./Max. Height: 8-1/2” / 34” • Forward Tilt: 15˚
$1,659.95 AFF-3180A
• Rear Tilt: 30˚
• Left Tilt: 12˚ • Right Tilt: 12˚ • Head Width: 12” - 18” • Head Length: 16” - 20” • Width: 26” • Length: 43”
MORE PRY BARS ON PAGE 37
12V WHEELED BATTERY CHARGER 40/15/5A WITH POWER MODE WITH POWER MODE + ENGINE START
ADJUSTABLE SHOP STOOL WITH BACKREST
3 D
$99.95 ATD-81075 MORE SHOP STOOLS ON PAGE 8
• Weight Capacity: 300 lbs. • Powder coated steel components • Seat height adjusts from 29.5” to 34.25” and swivels 360˚ • Seat Diameter: 14”
The PL3740 delivers versatile functionality with automatic charge routines, plus timed charge routines similar to traditional manual charging. Plus, it adds 225A Engine Starting Assistance and Stable Power Mode functions to provide versatile service in busy shops.
• Analog knob controls • Automatic charge mode • Multi-phase process • Stable power mode
• Timed charge routines • Manual / Timed charge mode • Polarity protection • Engine start assistance
$359.95 SOL-PL3740
MORE BATTERY ON PAGES 24-26
https://cloreautomotive.com/product/pl3740/
$379.95 ATD-7429 MORE LIFTING 11-15
Specifications: • Main Bulb Brightness: 150 lumens (high), 75 lumens (low) • Run Times: Up to 1.5 hours (high), 3 hours (low), 1.5 hours (red mode) • Top Spotlight Brightness: 150 lumens • Battery: 3.7V, 600 mAh LiPo rechargeable • Length: 3.7” 150 LUMEN INSPECTION PENLIGHT W/ HEADBAND AND HAT CLIP
1000 LBS. HYDRAULIC TELESCOPIC TRANSMISSION JACK
Specifications: • Capacity: 1,000 lbs.
$39.99 ATD-80252
• Minimum Height: 43.3” • Maximum Height: 74.8”
• Saddle Area Min.: 9.96” x 9.96”
• Expanded Saddle Area Max.: 13.58” x 13.78”
MORE LIGHTING ON PAGES 69-71
18 GALLON POLY WET/DRY UTILITY VACUUM
Number
Description Motor Power Cord
Features/Includes
Price
SPV-9627106
12 Gal. Poly Wet/Dry Utility Vacuum
5.5 PHP SVX2
18 ft.
1-1/2” cleaning tools, rear tool storage basket, 1-1/2” x 12 ft. locking hose (9062500), 1-1/2” x 12” floor nozzle, 1-1/2” extension wand, 1-1/2” gulper & crevice tools, claw utility nozzle, cartridge filter (9035033), foam filter sleeve (9058533), dry collection filter bag (9067333), 18.25” x 18.25” x 29” 1-1/2” cleaning tools, rear tool storage basket, 1-1/2” x 7 ft. locking hose (9050533), 1-1/2” claw nozzle & crevice tools, cartridge filter (9039833), foam filter sleeve (9052633), dry collection filter bag (9067133), 17.25” x 14” x 17.75”
$219.95
Features: • 1-1/2” x 12 ft. locking hose (9062500) • 1-1/2” x 12” floor nozzle, 1-1/2” extension wand
• Claw utility nozzle • 6.5 PHP SVX2 Motor • 18 ft. Power Cord
• 1-1/2” gulper and crevice tools • Rear tool storage basket
• 1-1/2” cleaning tools • Cartridge filter (9035033), foam filter sleeve (9058533), dry collection filter bag (9067333), 19.5” x 19.5” x 30”
SPV-5872911
5 Gal. Portable Wet/Dry Utility Vacuum
6.0 PHP
20 ft.
$179.99
$249.99 SPV-9627306
INDEX
Blow Guns...............................................53 Blowers...................................................... 8 Body Repair...................................18-19,64 Booster Cables.........................................26 Bottle Jacks..............................................13 Brake & Wheel....................................28-32 Brooms/Brushes. ....................................... 9 Cable Ties................................................... 7 Caliper Tools............................................. 62 Cam Shaft Tools....................................... 63 Carbide Burrs...........................................50 Carts................................................... 17,60 Circuit Testers......................................56-57 Clamps................................................ 21,41 Compression Testers................................. 58 Cooling System Tools.................. 1,27,54,64 Cordless Tools......................1-2,44-45,65,72 Creepers & Seats.....................................2,6 Cut Off Tools........................................47-49 Cutting Tools.............................................. 7 Diagnostics......................... 3,9,26,54-58,63 Disconnect Tools...................................... 64 Drill Bits...................................................50 Drum Dollies............................................68 Electric Angle Grinder..............................54 Electric Polishers......................................20 Electric Saws............................................54 Electrical Tools......................................... 42 Engine Stand & Cranes.............................11 Engine Tools.........................11,37,58,62-63 Extension Cords.......................................69
Tie Rod Tools............................................ 31 Timing Lights...........................................62 Tire Tools............................................. 28,69 Tool Storage........................................60-61 Torch Kits.................................................18 Torque Wrenches..................................... 42 Torx & Hex Bit Sockets.....................3,37-38 Torx & Hex Key Sets.................................37 TPMS Tools............................................... 32 Transmission Jacks...................................12 Truck Steps.................................................9 Under Car.......................................29-31,64 Under Hood.........................27,29-30,62,68 Under Hood Lights................................ 1,70 Vacuums................................................. 3,8 Vehicle Lifts.............................................14 Vises. ......................................................... 5 Welding Equipment.......................21-23,39 Welding Helmets.....................................21 Wheel Service Tools.......................28,31-32 Windshield Tools...................................... 18 Work Lights.....................................3,69-71 Work Table/Stand............................... 17,60 Wrench Racks..........................................39 Wrenches-Adjustable. ............................. 39 Wrenches-Combination................. 36,38-39 Wrenches-Crowfoot................................. 36 Wrenches-Ratcheting......................... 36,39 Wrenches-Torque..................................... 42
Fan Clutch Tools....................................... 63 Fender Cover..............................................9 Flaring/Tubing Tools........................... 31,42 Flashlights............................................... 69 Fluid Evac/Exchange................ 4,9,27,29,65 Fuel System Tools......................57-58,63-64 Fuel Transfer Equipment............................ 4 Funnels............................................... 66-67 Generator. ................................................. 7 Grease Guns.............................................65 Grease Accessories...................................65 Grinding Wheels...................................... 50 Hammers................................................. 43 Hand Tools.....................................33-43,59 Head Lamps.................................. 1,3,69,71 Heat Guns................................................18 Hex Keys..................................................37 Hose Clamp Pliers............................... 27,42 Hose-Air/Water..................................... 7,53 Hybrid Tools............................................. 42 Impact Accessories.............................. 33,41 Impact Hex Drivers...................................33 Impact Sockets..............................32-33,35 Inspection Camera............................. 3,9,63 Jacks and Jack Stands.................2,12-13,72 Jump Starts........................................25-26 Knives........................................................ 7 Leak Detection.........................................27 Lifting Equipment...............2,5,11-15,17,64 Lock Tools.................................................. 5 Lcok Ring Pliers........................................40
Lubrication. ................................ 2,65-68,72 Mag Trays................................................... 7 Masking Machines...................................17 Multimeters............................................. 56 Non Aerosol Sprayer................................16 Nut Drivers.......................................... 37,59 Oil Drains............................................ 30,67 Oil Filter Wrenches................................... 68 Paint Equipment..............................1,16-17 Paint Gun Accessories..............................16 Paint Shakers...........................................16 Parts Washers............................................ 7 Picks & Hooks..........................................37 Pinstripe Remover...................................18 Pipe Wrenches......................................... 39 Pliers. ....................................... 27,39-41,64 Power Inverters.......................................56 Power Pull.................................................5 Power Tool Access.......................... 38,48,50 Pressure Testers....................................... 57 Pressure Washer...................................... 72 Pry Bars...........................................2,36-37 Pullers. .......................................... 29,31,64 Pumps-Oil,Gas,Grease. .................... 4,66-67 Punch & Chisels.................................. 43,50 Ramps. .................................................... 11 Ratchets...................................... 2,36,38,41 Recip. Saw...............................................54 Reels-Air, Water, Lube.............................. 53 Refractometer. .......................................... 4 Riveters. ............................................. 19-20
Safety................................................... 9,54 Sanding Boards.......................................21 Scrapers................................................ 7,37 Screw Extractors................................. 32,59 Screwdrivers............................................ 37 Seal Puller...............................................30 Serpentine Belt Tools............................... 63 Shop Equipment..............................4-10,15 Shop Fans..................................................8 Shop Press...............................................15 Shop Stools.............................................3,8 Shop Supplies............................................9 Snap Ring Pliers.......................................40 Socket Trays............................................. 34 Sockets. ................................. 2,34,36,38,41 Soldering Tools........................................ 18 Specialty Tools...............7,9,18,42,59,62-63 Spray Paint Guns......................................16 Steering Tools.......................................... 30 Step Platform............................................9 Strut & Spring Compressors.....................29 Stud Removers.........................................59 Stud Welders........................................... 23 Surface Prep............................................50 Tachometer.............................................. 57 Tap & Die.................................................59 Tape Measures...........................................7 Terminal Tools....................................... 3,42 Test Leads...........................................56-57 Thermometers........................................... 9 Tie Downs & Tow Straps............................. 5
Abrasive Blasters.....................................19 Abrasives............................................ 19,50 Air Accessories.........................................51 Air Angle Grinder.....................................49 Air Compressors.......................................51 Air Cut Off Tools................................... 47,49 Air Die Grinders.............................. 20,47,49 Air Drills..............................................47-49 Air Filtration............................................52 Air Hammers.......................................47-49 Air Impacts...............................41,47-48,72 Air Needle Scaler......................................49 Air Nibbler...............................................46 Air Polishers/Buffers........................... 20,49 Air Ratchets........................................ 47,49 Air Sanders.................................... 20,47,49 Air Saws..............................................47-49 Air Shears................................................46 Air Tanks.................................................. 51 Air Tire Buffer........................................... 49 Air Tools..............................................46-49 Assortment Kits..........................9-10,19,68 ATF Exchange.............................................4 Back Pressure Testers............................... 58 Battery Charge & Test............3,24-26,55-56 Battery Maintainers............................ 26,56 Bench Grinders........................................54 Bit Sets....................................................38
MITYVAC ATF REFILLING AND EVACUATION
• Utilizes manual hand pump to produce pressure for fluid despensing • Includes 13 ATF adapters for most modern sealed transmissions • Conveniently located ON/OFF and flow control valve • 2.5-gallon capacity reservoir • Pressure relief valve to eliminate over pressurizing MTY-MV6412A 2.5 GALLON ATF REFILL SYSTEM
• Fluid is dispensed under pressure for smooth continual flow • Manual pump adds air above fluid level to prevent aeration • Sealed internal pump components • ON/OFF and flow control valve MTY-MV6400 1 GALLON FLUID DISPENSING SYSTEM
4 D
Dispensing Hose
Number
Capacity
Operation Includes
Price
1.2 gal. fluid reservoir; reservoir lid with integrated manual pump; pressure gauge and pressure relief valve; 5 ft. fluid dispensing hose with flow control and auto-shutoff valves; fluid dispensing wand; hanging hook and manual 13 Pc. Adapter Kit - for servicing Ford, Toyota, Volkswagen, Audi, Volvo, BMW, Honda, Nissan and Mercedes sealed (lifetime) automatic transmissions (MVA5800A). Includes 3 new adapters for: GM/Ford; Nissan/Infiniti M8x1.0; Nissan/Infiniti M12x1.25. Flex hose with control valve and wand (MVA575); 13 Pc. Adapter Kit - for servicing Ford, Toyota, Volkswagen, Audi, Volvo, BMW, Honda, Nissan and Mercedes sealed (lifetime) automatic transmissions (MVA5800A). Includes 3 new adapters for: GM/ Ford; Nissan/Infiniti M8x1.0; Nissan/Infiniti M12x1.25.
MIT-MV6400
$225.19
1.2 gal.
5 ft.
Air
MIT-MV6412A
$395.00
2.5 gal.
5 ft.
Air
• Max. Pressure: 20 psi • Push-to-connect, quick change accessory connections • Pressure gauge indicates fluid dispensing pressure • Integrated safety and manual pressure relief valve
MIT-MV7412
$399.99
2.5 gal.
5 ft.
Air
Dispenses and extracts a wide range of automotive fluids including brake, washer, power steering and transmission fluids, engine oil, gear oil and coolant. Convenient for evacuating, top- ping-off and refilling reservoirs, or pressure bleeding hydraulic brake and clutch systems. MTY-MV7110 2.5 GALLON FLUID EVACUATOR/ DISPENSER
MTY-MV7300 PneumatiVac FREE EXTENDED TUBE KIT (MVA6006)
MTY-MV7412 2.5 GALLON ATF REFILL SYSTEM • Utilizes compressed shop-air to produce pressure • Includes adapters for most modern sealed transmissions • Conveniently located ON/OFF and flow control valve • Used fluids or overflow can be extracted by switching from pressure to vacuum • Isolated flow control and pressur/vacuum switch valves provide simple functionality control • Redundant pressure control systems safely maintain peak output pressure between 20 and 25 psi
MTY-MV7201 FLUID EVACUATOR PLUS • Quick-drain pour spout • Large base with foot stabilizer • Automatic overflow prevention • Push button evacuate or dispense • Integrated 2.3 gallon capacity reservoir • Chemical resistant polyethylene construction • Convenient manual pump operation
$29.00 VALUE MVA6006
• Operates on compressed air • Integrated 2.3 gallon (8.8L) capacity reservoir • Large base with foot stabilizer • Chemical resistant polyethylene construction
• Independent air shut-off valve • Automatic overflow prevention • Quick-drain pour spout
MITYVAC FLUID EVACUATION AND DISPENSING
MTY-MV7400 FLUID EVACUATOR
Specifications: • Air Pressure for Vacuum: 110–115 psi • Depressurization Time: 60–90 sec. • Suction Speed: .04–.05 gpm • Suction Capacity: 4 gallons • Wheel Size - (2) 6” fixed • Material: Steel • Gallons: 6 • Weight: 45 lbs. 6 GALLON FLUID EVACUATOR
Number
Capacity Evacuate Dispense Operation Brake Bleeding Includes
Price
• Convenient manual pump operation • Quick drain pour spout • Automatic overflow prevention • Chemical resistant
MIT-MV7201
$164.59
2.3 gal.
Yes
Yes
Manual
Yes (with MVA7205) Fluid evacuator, 0.23 in. OD x 5 ft. long dipstick tube; 0.26 in. x 5 ft. long dipstick tube; 0.41 in. x 5 ft. long main evacuation tube; tube adapters; manual
Fluid evacuator, 0.23 in. OD x 5 ft. long dipstick tube; 0.26 in. x 5 ft. long dip- stick tube; 0.41 in. x 5 ft. long main evacuation tube; brake/clutch bleeding adapter kit (MVA7205) ; tube adapters; manual
Yes (MVA7205 included)
MIT-MV7300
$161.95
2.3 gal.
Yes
No
Air
FREE EXTENDED TUBE KIT (MVA6006)
polyethylene construction
• Integrated 1.9 gal. capacity reservoir • Large base with foot stabilizer
MIT-MV7400
$113.29
1.9 gal.
Yes
No
Manual
Yes (with MVA7205) Fluid evacuator, 0.23 in. OD x 5 ft. long dipstick tube; 0.26 in. x 5 ft. long dip- stick tube; 0.41 in. x 5 ft. long main evacuation tube; tube adapters; manual
Fluid evacuator, flex hose w/control valve and 1/2” evacuation wand (MVA575); 61.5” .226 OD (MVA578) and 97.5” .261 OD (MVA579) evacuation wands
MIT-MV7110
$282.69
2.5 gal.
Yes
Yes
Air
Yes
25-GALLON STEEL GAS CADDY
15 GPM, 12V DC Pump, 3/4” x 12’ Hose, 3/4” Manual Nozzle, 5 ft. Ground Wire, 18 ft. 12 Ga. 2 Wire Battery Cable, Telescoping Steel Suction Pipe (20” to 34½”). Two year warranty. Made in USA 12V DC PUMP WITH HOSE & MANUAL NOZZLE
JDI-6EV
Features: • Two-way operation for either siphoning or dispensing • Works with gasoline, kerosene, diesel, mixed fuels • Fire screened vent and filler neck combination
Features: • 7 ft. suction hose
MTI-FR1210H..........$628.29
• Easy-to-read vacuum gauge • Heavy-duty steel construction • (3) OE style evacuator adapters • Powerful venturi vacuum system
• Dolly handle for ease of movement • Pumps 1 gallon per 12 revolutions • Makes fuel transfer safe and easy • Complies with OSHA guidelines • Ground wire and clamp • Fill level gauge Specifications: • Pump Flow Volume: 0.8 - 4 gal./min.; 13.2 - 70.1 rpm • Pump Sucking Height: 34.64” • Discharge Hose Length: 8 ft. • Caddy Capacity: 25 gallon steel tank • Dimensions: 24.80” x 20.86” x 47.24” • Weight: 88 lbs.
12V DC HIGH FLOW PUMP WITH HOSE & MANUAL NOZZLE
DEF/COOLANT REFRACTOMETER • 3-in-1 tool combines coolant, battery, and DEF scales all in one • Automatic temperature compensation • Reads both Ethylene and Propylene Glycol based coolants SIMPLY THE BEST DEAL • (6) suction probes for most applications • Convenient storage tube for suction probes • Sight tube for quick indication of fluid level • Oil and chemical resistant wheels and casters • Self-evacuating with 10 ft. quick disconnect hose JDO-6EV. ................$411.69
20 GPM, 12V DC High Flow Pump, 1” x 12’ Hose, 1” Manual Nozzle, 5’ Ground Wire, 18’ 12 Ga. 2 Wire Battery Cable, Telescoping Steel Suction Pipe (20” to 34½”). Two year warranty. Made in USA
MTI-FR4210H..........$769.95
PORTABLE 12V DC 1/5 Hp, 3/4” NPT INLET NO NOZZLE
12V DC, 10 GPM, standard duty, explosion proof with carrying handle. Designed for diesel fuel. Includes pump, 6 ft. 12 Ga. 2-wire battery cable with clips and 30 Amp fuse. CE, 1 year warranty. Made in USA
$218.19 MTI-FR1612
ATD-2025................$538.99
Kit Includes: • Fluid dropper • Cleaning cloth • Screwdriver • Molded case
25-GALLON STEEL GAS CADDY
3-WHEEL MECHANICAL, 3/4” METER
• Fill level gauge • Fire-screened vent and filler neck • Wide footprint for stability • 8 ft. PVC suction/discharge hose with internal steel grounding wire • Tank ground wire and clamp • Decal set for contents identification • Use with gasoline, diesel, kerosene, bio-diesel, transmission fluid • UL Approved, OSHA Compliant Specifications:
3 wheel mechanical fuel transfer meter kit, 5-20 GPM. Aluminum construction. +/- 1% accuracy rating. Designed for gasoline, diesel, biodiesel up to B20, E15 and kerosene. Includes meter and fittings to mount on 3/4” outlet fuel transfer pumps. UL/cUL, ATEX, CE. Two year warranty. Made in USA
MTI-807CMK...........$340.89
$94.49 ATD-3325
HIGH FLOW ROTARY HAND PUMP
• Comes with 96” anti-static hose with diecast discharge spout • Heavy-duty, steel handle with locking latch and 2” bung adapter • Dispenses 1 gal. fluid per 5 strokes • Fits 15–55 gallon drums DOUBLE DIAPHRAGM FUEL TRANSFER PUMP
• Tests the urea concentration of DEF • 16-1/4” tester is accurate at all temperatures • Easy-to-read discs are magnified by convex design of the clear SAN plastic barrel DEF TESTER
• Heavy-duty, die cast aluminum construction • Ideal for volume fuel dispensing • 6 ft. delivery hose with metal nozzle • Pump inlet fitted with easy-to-clean wire mesh screen • 3 pc. threaded suction tube for use on 15-55 gal. drums
• Capacity: 25 gallons • Material: 14 Ga. steel • Pump: 2-way, UL listed, cast iron, rotary • Wheels (2) 10” HD steel • Weight: 95 lbs.
• Effortless rotary action dispenses up to 55 gal. in 3 minutes
$19.95 THE-108
$776.29 JDO-FC25GC
DO NOT USE WITH: Corrosive liquids, solvents, acids, alkalis etc.
For use with Gasoline, Diesel Fuel and Motor Oils ATD-5025. .................. $241.89
ATD-5020. .................. $299.99
SIMPLY
DEAL
ATD-9316 FEATURES: • PROFESSIONAL GRADE FOR YEARS OF DEPENDABLE SERVICE • CAST IRON BODY WITH FORGED STEEL BEAM PROVIDES ADDED STRENGTH • 270˚ SWIVEL LOCKING BASE • REPLACEABLE HARDENED STEEL SERRATED JAWS • LARGE INCORPORATED ANVIL WORK SURFACE
5 D
635
LIFETIME WARRANTY 600 SERIES CHAIN PULLERS
• Thick steel construction • Heat treated • Drop forged safety hooks 615
Rated Capacity 1/4 Ton 1/2 Ton 3/4 Ton 1-1/2 Ton
Standard
Load Chain Dia. (in.)
Min. Handle
Number
Lift 5 ft. 5 ft. 5 ft. 5 ft. 5 ft.
Length
Weight 4.3 lbs.
Price
9316
AMP-602 AMP-603 AMP-605 AMP-615 AMP-635
$164.09 $199.99 $223.29 $269.95 $419.95
3/16” 3/16”
7”
7.5” 13” 18” 18”
7 lbs.
Jaw
Max
Throat
Ship
Part #
Width Opening Depth
Weight
Price
1/4”
13.9 lbs. 24.4 lbs. 41.2 lbs.
ATD-9305 ATD-9306 ATD-9316
43 lbs. $192.79
5” 6” 6”
5-1/2”
3”
5/16”
3-7/16” 56 lbs. $241.59
3 Ton
13/32”
7”
72A
39.6 lbs. $123.69
6.50”
3.8”
• Cable limiter keeps 2 wraps of cable on the ratchet wheel 2 TON PRO POWER PULL
• Leverage: 36:1 • Weight: 8.1 lbs.
LIFETIME WARRANTY
• Capacity: 2 Ton • Made in USA
• Pull: 6 ft.
• Cable: 3/16”
B.A.S.H. SPECIAL EDITION GREEN 5” ATV TRUCK HITCH VISE WITH FREE MOUNTING BRACKET AND 2-1/2 LBS. B.A.S.H. SLEDGE HAMMER • MOUNTS ON BENCH OR TRAILER • GREEN POWDER COAT RESISTS SCRATCHES • FITS A STANDARD 2” HITCH AND INCLUDES A HITCH PIN
AMP-72A....................... $79.49
LIFETIME WARRANTY
1 TON CHAIN BLOCK • Thick steel construction, heat-treated, triple geared • Drop forged safety hooks • Rated Capacity: 1 Ton • Unit Lift: 10 ft. • Load Chain Diameter: 1/4” • Total Hand Chain: 20 ft. • Weight: 5.6 lbs.
• LIGHTWEIGHT FOR EASY TRANSPORT • PATENTED 360˚ LOCKING HANDLE
10025BH
5/16”-3/8” RATCHET LOAD BINDER AMP-410. .................... $229.95
410
410 (SIDE)
• Working Load Limit: 5,400 lbs. • Proof Load Test: 10,800 lbs. • Min. Breaking Strength: 19,000 lbs.
• Size/Grade: 5/16” / 70 • Size/Grade: 3/8” / 40
• Take Up: 9-5/16” • Handle Length: 14”
WILTON UTILITY BENCH VISES FEATURE A 30,000 PSI GRAY CAST IRON BODY AND MOVEABLE JAW WITH 60,000 PSI DUCTILE IRON BASE • LARGE ANVIL • BUILT IN PIPE JAWS • 360˚ LOCKING BASE • DUAL LOCK DOWNS • 4 MOUNTING POSTS
25-YEAR WARRANTY
• Weight: 10.4 lbs.
13070
AMP-13070. .................. $68.79
28815 28816
• Hardened steel pivot points and swivel yoke • Heavy-duty aircraft cable, slip hook and durable plastic hand grips • High alloy aluminum ratchet wheel • Cadmium plated steel frame and cable guard • Notch at a time automatic safety release 7495 POWER PULLERS
B.A.S.H. SPECIAL EDITION GREEN 6-1/2” UTILITY VISE WITH FREE 4 LBS. B.A.S.H. SLEDGE HAMMER • LARGE ANVIL WORK SURFACE
7496
Max Pull
Leverage
Max. Pull Length
Cable Dia. 3/16”
Part #
Ratio 32:1 34:1
Price
• DROP FORGED 46 HRC STEEL HEAD ENDURES DEMANDING APPLICATIONS • GREEN POWDER COAT RESISTS SCRATCHES • PERFECT FOR GENERAL CLAMPING APPLICATIONS
ATD-7495 ATD-7496
$59.19 $97.09
2 Ton 4 Ton
6 ft. 6 ft.
1/4”
11128BH
8077
TIE DOWNS AND TOW STRAPS
8071
Jaw
Max
Pipe
Throat Depth 4-1/4”
Ship
Part #
Model
Width
Opening
Capacity 7/8 -3”
Weight
Price
Number
Description
Capacity 3,333 lbs.
Adjustable
Price
WLT-10025BH WLT-11128BH WLT-28816 WLT-28815 WLT-21400
Call For Price
-
5”
6”
-
ATD-8071 Ratcheting Tie Down, 2” Wide Nylon
$29.59 $44.49 $60.59
1’–27’ 1’–15’ 1’–20’
41 lbs. Call For Price 78 lbs. Call For Price 49 lbs. Call For Price 50 lbs. Call For Price
676
6-1/2”
5-1/2” 8-1/2” 6-1/4” 5-1/4”
1/8”-2-1/2”
5”
ATD-8072 4 Pc. Ratcheting Tie Down Set, 1” Wide Nylon 1,000 lbs.
648UHD 656UHD
8”
3/4”-4”
4-1/2” 4-1/4” 3-3/4”
ATD-8073 Vehicle Tow Strap, 2” Wide Nylon ATD-8074 4 Pc. Tie Down Set, 1” Wide Nylon ATD-8077 Emergency Tow Strap, 2” Wide Nylon
20,000 lbs. 1,500 lbs. 10,000 lbs.
6-1/2”
1/4”-3-1/2” 1/4”-2-1/2”
1’–5-1/2’ $32.89
745
5”
$37.89
1’–15’
from ATD-8072 Set
4 PC. EASY-ACCESS AND INFLATE-A-WEDGE ™ KIT
VEHICLE POSITIONING JACKS
SUPREME MASTER AUTO LOCK OUT KIT The ultimate kit available today to handle emergency lock outs. Includes 18 piece automotive lock out tool kit, heavy-duty molded case with vinyl inserts and fully illustrated manual.
1,500 LBS. CAR DOLLY SET
7465
• Push tool into door between the weather stripping and the window glass • For use on cars with lock button on the side of door UNIVERSAL LOCKOUT TOOL INFLATE-A-WEDGE ™ Safely separate the door frame from the vehicle body to insert a tool and unlock a vehicle. QUICK CONNECT LOCKOUT KIT Fast, quick connections in tough lockout situations. Includes Inflate- A-Wedge™, Plastic Slip Jim and (2) plastic door wedges LOC-146....................... $99.95 Includes Plastic Slip Jim, (2) plastic door wedges and Inflate- A-Wedge™; middle extension piece for across the car and long reaches; shorter tip for lock buttons 2 PC. EASY ACCESS AND INFLATE-A-WEDGE ™ KIT Collapses for easy storage, 53” long. Includes Plastic Slip Jim, (2) plastic door wedges and Inflate-A-Wedge™ LOC-140....................... $73.49 LOC-145....................... $93.49 ATD-4972..................... $10.89 LOC-275.............$41.49
$171.49/each ATD-7465
$226.89 LOC-1000
• Max. weight 1500 lbs. per jack • (4) Heavy-duty phenolic casters
1000
GRAND MASTER AUTO LOCK OUT KIT visit https://www.ltitools.com for kit contents
• Easy, foot pedal lifting smoothly raises vehicle • Double pawl ratchet lifts tires between (2) rollers • Use on vehicles weighing up to 6000 lbs. (4 jacks) • Allows vehicle to be moved in any direction • Accommodates tires up to 12” wide
A comprehensive 14 pc. automotive lock out tool kit, it has been updated to include new specialty tools. Includes a fully illustrated manual and comes in a heavy-duty vinyl carrying case. LOC-500.............$94.69
STORAGE RACK for VEHICLE
500
Specifications: • Size: 12” W x 16” L x 4.8” H • Maximum Weight: 1,500 lbs. per dolly • (2) dollies per box • Casters: (4) heavy-duty 3” dia. swivel casters (2 lock) • Great for moving cars, trucks, trailers, lawn tractors, etc. against a wall or into a corner • Each heavy-duty dolly has a 1,500 lbs. capacity (6,000 lbs. capacity for 4 dollies) • Frees up valuable garage or shop space • Allows vehicle to be moved in any direction ATD-7466 (PAIR).........$130.59
7464
POSITIONING JACKS • One stand holds (4) ATD-7465s • Heavy-duty steel construction
• Durable powder coat finish • (4) 3” swivel casters • 30” W x 18.5” D x 9” H
6 PC. LOCK OUT TOOL KIT Includes Universal Tool for most standard locks, Button Jack Tool for button-type locks, Vent Key Tool for truck and van vent windows, Slide-unlocked Tool, K-key for opening locks directly through the key hole, and wedge.
$77.99 ATD-7464
ATD-4976..................... $33.39
ATD-7464 Rack holding (2) ATD-7465s
HEAVY-DUTY 3-IN-1 LOW PROFILE CREEPER
6 D
• Great for getting to the engine from the top of the vehicle • Allows extended periods of time spent bending over the engine without the effect of painful fatigue • The height of the Easy-Reach Creeper can be adjusted to allow use on many different types of vehicles • Constructed of heavy-gauge steel with a powder coat finish to protect from scratching • 3” swivel casters with (2) locking swivel casters for easy movement • Deck is padded and covered with heavy vinyl for comfort and durability • Folds for easy storage • Height adjustable from 47.5” to 70” • Shipping Dimensions: 51.2” x 24.4” x 6.7” • Working Load Limit: 400 lbs. 400 LBS. WORKING CAPACITY $317.69 ATD-8116F
• PERFECT FOR THE MECHANIC, PAINT AND BODY OR DETAIL SHOP
• QUICKLY AND EASILY CONVERTS FROM LOW PROFILE CREEPER, TO Z-CREEPER SEAT, TO L-SEAT
FOLDS FOR EASY STORAGE
Features: • Comfortable fully upholstered pad • (6) Oil and chemical resistant 3” polyurethane wheels • Powder coated steel frame Specifications: • Weight Capacity: 450 lbs. • Size: 39-7/8” L x 26” W x 4-1/2” H • Weight: 26 lbs.
450 LBS. WEIGHT CAPACITY
3-IN-1
ATD-81049. .................... $146.79
ALLOWS SAFE, EASY ACCESS TO MOST TRUCK AND 4WD VEHICLE ENGINE COMPARTMENTS!
CREEPER SEATS
LOW PROFILE CREEPER
CONVERTIBLE CREEPER
ATD-81009
ATD-81010
ATD-81047
ATD-81012
• 40” Heavy-duty steel frame easily transforms from creeper to shop seat! • Full upholstered pad and powder coat finish • (6) 3” polyurethane oil resistant casters with full ball bearings • 40” L x 6-1/2” H x 19” W • Capacity 450 lbs.
PADDED CUSHION SHOP SEATS HAVE EASY MOBILITY AND CONVENIENT TOOL STORAGE!
Seat
Wheel Size
Part #
Description
Heights 16”-21”
Capacity 300 lbs. 250 lbs. 300 lbs. 450 lbs.
Price
• 1/2” ground clearance • 40” L x 26-3/4” W • 2” minimum height allows the installer to crawl under the lowest of vehicles • 3” polyurethane wheels for smooth movement around the shop floor 400 LBS. WEIGHT CAPACITY DEAL 40” DROP-ARM CREEPER (81042) WITH A FREE 105 PC. MASTER BIT SET WITH RATCHET (ATD-505) BY MAIL-IN REBATE SIMPLY $116.19 ATD-81046
* *
ATD-81010 ATD-81009 ATD-81012 ATD-81047
$136.79 $ 65.39 $ 174.39 $133.95
Hydraulic Shop Seat
(5) 2-1/2” (4) 2-1/2” (5) 2-1/2”
Mechanic’s Creeper Seat Hydraulic Tractor Seat HD Toolbox Creeper Seat
14”
16”-21” 18-3/4”
450 LBS. WEIGHT CAPACITY $110.69 ATD-81045
(4) 3”
*ATD-81010 and 81012 have a pneumatic lever for vertical movement
REPLACEMENT WHEELS ATD-81001 Replacement Wheels for ATD-81012 & ATD-81010 ATD-81008 Replacement Wheels for ATD-81009
CREEPERS
ATD-81042
Promotion runs April 1 thru June 30, 2023 Mail-In Rebate forms available at atdtools.com/literature
ATD-81051
BY MAIL-IN REBATE FREE GIFTS
$22.29 VALUE ATD-505
ATD-81060
JEEPERS KEEPER CREEPER HANGER
X-LARGE 400 LBS. WEIGHT CAPACITY
ATD-81006 Replacement Wheels for ATD-81031 ATD-81005 Replacement Wheels for ATD-81042 ATD-81036 Replacement Wheels for ATD-81051 ATD-81035 Replacement Wheels for ATD-81060
*ATD-81051 and ATD-81060 both have a one year limited warranty
Overall L x H x W
Wheel
Ground
ABS plastic hooks can be mounted anywhere on the 24” wide rail to accommodate several different types of plastic or metal creepers. Two 5” slots in the rail line up with toolbox or cart handle mounting holes and allow mounting from 14”–23”. LIS-21350......................... $27.89
Part #
Description
Size
Clearance Capacity
Price
ATD-81031 ATD-81042
$83.89
40” Steel Creeper
40” x 4.5” x 16.73” 40” x 4.5” x 16.73” 39.75” x 4.25 x 19”
(6) 2-1/2”
1-1/2” 1-1/2”
300 lbs.
300 lbs. $123.69
40” Drop-Arm Steel Creeper with adjustable Head Rest
(6) 3” Swivel
ATD-81051* 40” Heavy-Duty Blow Molded Mechanic’s Creeper ATD-81060* X-Large Blow-Molded Mechanic’s Creeper
$69.79 $96.95
(6) 3” Swivel Multi-Terrain
1” 1”
300 lbs. 400 lbs.
45” x 6” x 22.5”
(6) 4” Swivel
FOLDABLE CREEPER PAD Features: • Heavy-duty EVA foam is water, chemical and impact resistant
GearSeat MOBILE WORKSTATION • Spinning gear tray • Molded seat • 5” casters
LOW-PROFILE PLASTIC CREEPERS
• Unfolded: 18” x 48”; Folded: 18” x 24” • Great for off-road situations and under a vehicle where no jack or lifts are used FOLD-UP PADDED CREEPER LIS-95002.......... $56.69 • Thick cushion design for comfort • End section folds to form headrest • (4) cut-out compartments for small parts • Size (unfolded): 47.625” x 16.5” x 1.125”
LIS-94102 (SIDE)
KING CRAWLER CREEPER
• BODY-FITTING DESIGN WITH LOW PROFILE, 7/8” CLEARANCE • EASY-TO-CLEAN SURFACE RESISTS SOLVENTS, GREASE AND FUEL
$255.19 MTI-2-230
ATD-81015. ....................... $46.39
THE 400 LB. CAPACITY KING CRAWLER “ALL TERRAIN” CREEPER GOES WHERE OTHER CREEPERS CAN’T!
Item
Color
Price
• 1-1/4” ground clearance • Low center of gravity
LIS-92102 LIS-93102 LIS-94102 LIS-97102
$128.69 $128.69 $128.69 $128.69
Red
450 LBS. CAPACITY
• (4) 5” heavy-duty swivel casters with axle bearings allow easy rolling over almost any outdoor, garage or shop surface
2-230
Yellow
Blue Black
MTI-1-200. ...... $242.89
PARTS WASHERS ALL ATD PARTS WASHERS FEATURE FLEXIBLE SPIGOTS • USE WITH NON-CORROSIVE WATER BASED SOLVENTS • USE WITH NON-CORROSIVE WATER BASED SOLVENTS
7 D
ATD-8524 BENCHTOP
Description/ Tank Cap.
Pump Output
Overall (L x W x H)
ATD-8531
Part No.
Solvent 3.5 Gal.
Voltage
Gal./Hr.
Price
ATD-8524 ATD-8527 ATD-8525
$131.99 $454.39 $296.59
Benchtop/5 Gallon
110V 110V 110V
264 264 264
15” x 12” x 9 ”
40 Gallon Parts Washer 20 Gallon Parts Washer
16 Gal. (min.)
44-1/2” x 21-1/4” x 35” 30-1/2” x 21-1/4” x 34-5/8”
20 Gal.
PARTS WASHER BRUSHES ATD-8531 26” Flow-Through Parts Washer Brush fits all ATD branded and most other brands parts washers LIS-89530 ORIFLO® Flow-Thru Brush with Tube designed for industrial parts washers with solvent circulating pumps $23.95 LIS-89500 ATLASTA® Parts Brush stiff Trialoy® polyester filament for use with petroleum or water-based cleaning solutions $12.49 $15.79
ATD-8527
LIS-89530
ATD-8525
LIS-89500
6580 WATT GASOLINE GENERATOR 6,580 PEAK WATTS OF POWER FOR RUNNING APPLIANCES, TOOLS, AND MORE! Features: • 6,580 Peak Watts/ 5,500 Running Watts • 120V and 240V output • Automatic voltage regulator • Digital voltage meter • 12V Battery Charging output • Recoil start backup • Electric push start with battery • 5.2 gallon fuel tank • Strong 274cc, 8 Hp engine protected
• Heavy-duty tear down table with all steel construction supports 1,000 lbs. • Reinforced steel top with 1/2” lip on all sides • Offset drain for fluid containment in the removable 3 gallon drain pan • Lockable storage drawer • 4” swivel casters allow easy movement within the shop • (2) locking swivel casters keep your table in place HEAVY-DUTY TEAR DOWN TABLE • Bench Size: 48” W x 31-1/2” x D x 33-3/4”
• Weight Capacity: 1,000 lbs. • Shipping Weight: 145 lbs.
1,000 lbs. CAPACITY
by a durable powder coated frame • (2) 5-20R, 120V, 20A Duplex Outlets • (1) L5-30R, 120V, 30A Twist-lock Outlet
ATD-70325A..................$661.99
• (1) L14-30R, 120V/240V, 30A Twist-lock Outlet • Dual drop-down handles and never-flat wheels • 12 hour run-time at half load (on single tank of fuel) • Includes spark plug wrench and battery
STAINLESS STEEL MAGNETIC TRAYS ATD-8760 5-7/8” Round x 1” Deep, (1) magnet
USE IN ANY DIRECTION EVEN UPSIDE DOWN, TO HOLD HAND TOOLS, SCREWS, NUTS, BOLTS, AND OTHER SHOP, OFFICE, OR CRAFT SUPPLIES
visit http://pulsar-products.com for more information
PUL-PG6580E. ......................$799.99
$ 7.19
12,000 WATT DUAL FUEL PORTABLE GENERATOR THE EXTENDED RUN TIME AND OUTPUT MAKE IT AN IDEAL SOURCE OF BACKUP POWER FOR RUNNING LARGE APPLIANCES AND OTHER DEVICES! Features:
ATD-8761 9-3/8” W x 5-3/8” L x 1” Deep, (2) magnets $ 17.79 ATD-8762 11-1/2” W x 10-1/2” L x 1” Deep, (4) magnets $29.99 ATD-8763 14” W x 6-1/4” L x 1” Deep, (3) magnets $ 23.39
PERMANENT MAGNET WITH RUBBER SCRATCH GUARD
• 12,000 Peak Watts / 9,500 Running Watts - Gasoline • 10,800 Peak Watts / 8,550 Running Watts - LPG • 457cc, OHV engine, CARB Approved • Switch & Go - while generator is running, switch from Gas to LPG or LPG to Gas • (4) 120V Outlets, (1) 120/240V Twist-lock Outlet, (1) 120/240V 50 Amp RV Outlet and (1) 12V DC Outlet • Switch & Go capability with electric push start and recoil back-up • 3-in-1 digital meter, drop down handles, 10” never flat wheels PUL-PG12000B..................$1,199.95
8760
8763
8761
8762
Number
Description
Quantity 5 pack
Price
ATD-8533 ATD-8813 ATD-8546 ATD-8812 ATD-7527
$2.39 $21.79 $6.89 $7.29 $15.79
Utility Knife Blades, .024”
7527
Utility Knife Blades in Dispenser, .024” 100 ea.
Single Edge Razor Blades, .009” Single Edge Razor Blades, .012”
100 ea. 100 ea.
4 Pc. Scraper Set -
(1) All Purpose, (1) Extended, (2) Mini
ATD-8801
$1.39
13 Point Snap Knife - Fishbowl
50 pc.
• Telescoping inspection mirror • Mini magnetic tray • Telescoping magnetic pick-up tool 3 PC. UTILITY TOOL SET
4 PC. TAPE MEASURE SET Set Includes:
ATD-8555
$80.29 $3.99 $8.89 $8.89
Mini Scrapers - Fishbowl
50 pc.
• (1) 12 ft. x 5/8” • (1) 16 ft. x 3/4” • (1) 25 ft. x 1” • (1) 33 ft. x 1” $19.69 ATD-330
ATD-8555-1 Mini Scraper - Individual (RED or BLUE) 1 ea.
TIT-11015 TIT-11018
Folding Pocket Utility Knife - RED Folding Pocket Utility Knife - BLUE
1 ea. 1 ea.
$13.79 TIT-11065
HOSE NOZZLES
SWIVELGRIP ™ WATER HOSE
PISTOL GRIP $11.09 ATD-9100
FIREMAN STYLE $15.89 ATD-9101
5-PC. TELESCOPIC TOOL KIT
• Male and female SwivelGrip™ Connections • Max. Working Pressure at 70˚ F: 150 psi • Durable, abrasion-resistant outer cover
• Rectangular Lighted Inspection Mirror with (2) LED lights - extends to 34.25” • Round Inspection Mirror - extends to 28.5” • 15 lbs. Magnetic Pick-Up Tool with contoured grip - extends to 30” • Flexible / extendable Aluminum Inspection Light with (3) LEDs and 5 lbs. magnetic pick up function - extends to 22.25” • 1 lb. Magnetic Pick-Up Tool - extends to 25.4” RECTANGULAR MIRROR W/ 17” TELESCOPING HANDLE • Double ball joint allows mirror to swivel 360˚ freely, yet hold desired position • Insulated handle extends from 7” to 12” • 2” x 3-1/2” rectangular mirror • Overall Length: 17” $8.59 ATD-333 ATD-319. ............................. $19.89
• Anodized aircraft aluminum ends • Extreme all-weather flexibility
• Won’t kink under pressure • Lays flat – no memory MTI-HFZG550YWS
BLACK UV STABILIZED CABLE TIES Description Tensile Strength Price
$ 71.99 $ 122.79
5/8” x 50 ft.
MTI-HFZG5100YWS 5/8” x 100 ft.
400 Pc. UV Cable Tie Assortment - (200) 4”, (100) 8” and (100) 11”
ATD-20400
$18.59
18 and 50 lbs.
ATD-20404 ATD-20408 ATD-20411 ATD-20414 ATD-20415 ATD-20418 ATD-20425 ATD-20436
$3.49 $5.79 $9.79 $12.69 $21.69 $9.99 $12.19 $13.69
4” Black UV Stabilized Cable Ties (100)
18 lbs.
HEAVY-DUTY WATER HOSE • Features GUARD-N-GRIP connector
8” Black UV Stabilized Cable Ties (100)
50 lbs.
11” Black UV Stabilized Cable Ties (100)
50 lbs.
• High burst strength
• Machined crushproof solid brass couplings • 5 ply scuff-resistant rubber and vinyl jacket • Premier quality hose with a lifetime guarantee
• Kink free
14” Black UV Stabilized Cable Ties (100)
50 lbs.
• Telescopes from 6-3/4” - 40-1/2” 2” X 3-1/2” TELESCOPING MIRROR
15” Black UV Stabilized Cable Ties (100)
120 lbs.
MTI-FXG5825 MTI-FXG5850 MTI-FXG5875 MTI-FXG58100
$27.19 $45.89 $64.95 $ 85.89
25 ft. 50 ft. 75 ft.
18” Black UV Stabilized Cable Ties (25)
120 lbs.
$10.29 LIS-32010
25” Black UV Stabilized Cable Ties (25)
175 lbs.
36” Black UV Stabilized Cable Ties (25)
175 lbs.
100 ft.
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72Made with FlippingBook flipbook maker