SIMPLY THEBEST DEAL
• (5) adapters for 2- and 4-wheel disc brake assemblies of most cars • May be used on or off the car • Helps prevent damage to the piston and boot UNIVERSAL DISC BRAKE CALIPER TOOL LIS-25000........................... $95.99
DELUXE STEERING WHEEL REMOVER AND COLUMN SERVICE TOOL Includes: Steering wheel puller, special puller legs for steering wheels without threads, lock plate compressor tool to remove snap rings, pivot pin remover for GM, Chrysler and Ford tilt columns ATD-3059................................. $111.69
30 D
LIS-25000
• For use on most domestic and import 2WD and 4WD vehicles • Use on front or rear disc brakes • Includes tools and adapters for both right- and left-handed threads • Use on main brakes and parking brake systems 18 PC. DISC BRAKE CALIPER TOOL SET LIS-29090......................................... $77.19 • Adapter will work on right or left hand rewind calipers • 2 Pin range is from 1/2” to 1-1/2” • 3 Pin range is from 1” to 1-11/16. Use with a 3/8” square drive BRAKE PISTON WIND BACK TOOL, 2 & 3 PIN ATD-5165. ........................................ $95.49 Includes an 11-1/2” long driver that allows bushings to be driven straight without removing the hub assembly. Double-sided cone snaps onto driver to drive out and install bushings. Use flanged end to install and tapered end to remove. Also removes truck leaf spring bushings. 2 PC. TRUCK ANCHOR PIN BUSHING DRIVER LIS-25200......................................... $45.89
STEERING WHEEL LEVEL • Used to level the steering wheel during front-end alignment procedures • Ideal for use with four-wheel laser aligners • Self-retaining and centering using a spring loaded mechanism • Built in level bubble shows horizontal position • Suitable for steering wheels with an internal diameter between 10.5” and 13.4” AIR BRAKE SERVICE TOOL KIT • Removal tools for slack adjusters and push-rod clevis pins used on brake systems of class 7 and 8 vehicles • Works on manual and automatic slack adjusters • Includes 2 slack adjuster pullers and a brake clevis pin press ATD-5164. ................................$236.49
LIS-29090
ATD-5165
ATD-3100................... $74.39
HEAVY-DUTY BEARING RACE AND SEAL DRIVER SET Fits most Class 8 over the road trucks and trailers, and some medium duty trucks. • Use the tapered driver side for bearing races and the flat side for seals. Includes (6) drivers and handle extension for driving bearing races and seals on hubs with deep brake drums without removing the drums. • Range: 3-43/64” to 6”
SMALL BRAKE CALIPER PRESS
• Works on small and medium single piston brake calipers found in subcompact to midsize cars with single piston calipers • ACME screw for durability • Size Range: .95” to 2.25” (compared to 1.5” to 3” on the Lang 279)
FRONT WHEEL DRIVE BEARING ADAPTER KIT These front wheel bearing adapters replace wheel bearings while keeping the steering knuckle and strut assembly intact on the vehicle, eliminating the need for front end LIS-61900.................................$278.69
277
KAS-277............................. $64.59
BRAKE CALIPER PRESS
alignment once the service work is done. • For front wheel drive cars and light trucks • Black oxide finish • Custom case for storage
$73.69 KAS-279
• Works on twin & quad piston fixed calipers,and single & twin piston floating calipers • Size Range: 1.5” to 3” • Made in USA 11 PT. TRUCK BRAKE CALIPER SOCKET • 11 Point Socket for Air Disc Brake Caliper Adjustment • Works on Bendix ADB 22X, ADB 225, SN6, SN7, SK7 air disc brake
279
• (11) drivers to fit automobiles and trucks up to 1 Ton • Drivers can be used on bearing races and seals • Range: 1-1/2” to 4-1/2” • (2) handles, (1) for hammering and (1) for use with an air hammer MASTER PNEUMATIC BEARING RACE AND SEAL DRIVER SET ATD-8625. ................................ $131.69 LIS-12800.................................$158.69
$10.29 LIS-29120
Brake Spring Bar
$37.09 LIS-40030
• Slip the hook into retaining spring loop and press down against the axle to remove spring. Lever action against the axle eliminates need for wrenches, pry bars and screwdrivers. Tool is 18” long with a molded handle for comfort. The tool has a black oxide finish.
Bendix/Knorr-Bremse AIR DISC BRAKE PAD RETAINER TOOL • The only tool for servicing Bendix/Knorr-Bremse air disc brakes • A safer and easier way to remove pad retainer
2 PC. AUTOMATIC SLACK ADJUSTER TOOL SET • Specifically designed for installation and servicing of Meritor air brake systems • 5/16” double-square head reversible wrench with built-in ratcheting mechanism is offset to provide increased clearance • Fork-end tool fits securely under the tensioner release button, allowing hands-free operation without prying or damaging it
• Includes driver handle and (9) adapter sizes • Range: 1-1/2” to 3” • Easier to install bearing races and seals without damage to race, axle housing or brake rotors 10 PC. BEARING RACE AND SEAL DRIVER KIT ATD-8622. ..................................$88.19
• Works with left and right side calipers • Heat treated for strength and durability • Designed to work with or without caliper shield • Easy grip handle
10 PC. BEARING RACE AND SEAL DRIVER MASTER KIT Easier to insert wheel bearing race & seals without damage to race & axle housing • (9) drivers to fit most common wheel bearings and molded case • Range: 1-1/2” to 3”
$52.49 LOC-891
$44.69 ATD-5166
LIS-12980.................................$101.19
LANG SLACK ADJUSTERS
2 PC. SEAL PULLER SET • Pin location affects the positioning of the tool
Prevents oil mess during wheel repair. The pan fits rims with 13-3/4” ID and larger. Handle compartments hold hub nuts out of the oil. Made of polypropylene for durability. Will not warp if oil is warm. LIS-19852...................................$18.29 • Greater surface area on hook prevents seal puller from ripping through the seal Set Includes: Small and large sized pullers for use with 3/8” breaker bar or ratchet; 2” and 4” pins for various diameter seals KAS-850.....................................$26.29 Truck wheel pan
7578
8569
4651 (both tools)
KAS-4651 KAS-8569 KAS-7578
$ 57.59 $52.19 $ 31.09
Rockwell/Arvin Meritor Slack Adjuster Release Tool & Wrench
9/16” Bendix Slack Adjuster Wrench 7/16” Haldex Slack Adjuster Wrench
DISC BRAKE SPREADER
DISC BRAKE PISTON TOOL • Rotate the parking brake activated piston back into the caliper cylinder when replacing worn pads on vehicles equipped with four wheel disc brakes • Will work on most import, Ford, Chrysler and some GM models ATD-5060. ............... $10.99 CAUTION: DO NOT USE WITH POWER TOOLS • Compresses brake piston in seconds making dual piston pad replacement an easy job DUAL PISTON BRAKE CALIPER COMPRESSOR LIS-25750................ $65.99
• Change disc brake pads quickly and easily • Spreader will compress the inner pad and reset the piston for easy pad replacement • Heavy-duty construction
BRAKE PAD GAUGES
2-IN-1 S-CAM BRAKE TOOL
• Designed with an easy to use and readable color code scale: Red = Replace , Yellow = Caution , Green = Safe which allows the user to quickly check level in a safe manner
ATD-5163 top and side view shown
• The brake thickness gauge allows you to quickly measure the external & internal brake pads to help identify if a vehicle has a sufficient amount of brake pad lining
Comprised of a steel shaft with a U-shaped fork on one end to stretch the retaining spring so that both halves of the brake shoe are held together, which enables the user to hook up the pin. An S-shaped device on the opposite end enables the user to position the brake shoes in a way that allows leverage for installation of the rollers. The hooked end pulls the brake shoes apart so that the rollers can be installed faster and more safely. ATD-5163. ............... $37.29
ATD-5050. ...............$10.89
MIL-941
SPEEDY BRAKE PAD SPREADER
8 PC. MANUAL BRAKE PAD GAUGE MM/SAE TOOL SET - 2-12mm www.miltonindustries.com for full specifications MIL-941................................ $29.95 PENCIL STYLE BRAKE PAD GAUGE - 0-20mm MIL-942................................ $17.39
• Compresses brake pad in seconds making brake pad replacement an easy job LIS-24300................ $53.19
Made with FlippingBook flipbook maker