EZ-TorQ III Manual
4. Graph
No
Item
Description
1
Torque
Peak torque, Track torque or First Peak torque, Track torque or First-peak torque at each mode
Final peak (only First-Peak)
2
Final torque value on the First Final torque value on the First-Peak mode.
3
Parameters
Parameters on the advanced view operation.
OK zone can be created by the ON/OFF switch when there is The target torque The Min/Max tolerance from the target will create the green zone on the graph OK zone can be created by the ON/OFF switch when there is a target torque set. The target torque setting is the red line. target torque set. axis shows the max torque, he max torque applied is refreshed by real-time monitoring. X,Y scale is automatically rescaled llected data. axis shows the time in ms (milli-second). Sampling rate is 1ms.200 total data points can be captured without data compression. 5,000 data points ( 5 seconds) can be compressed and displayed Y-axis shows the max torque, The max torque by the collected X-axis shows the time in ms (milli Sampling rate is 1ms.200 A total of 5,000 data time monitoring. X,Y scale is automatically rescaled without data compression. displayed
4
OK Zone
5
Y-axis max torque
6
X-axis time (ms)
7
Manual reset
Clear the display by touching the circle area the display by touching the circle area
Tech Support: (669) 200-4219 www.mountztorque.com
9
Made with FlippingBook Annual report maker