EZ-TorQ III Manual
12. How to set up RS-232 Port
232 Port ( Available as of October 2025)
To enable RS-232 communication with the EZ Please follow the steps below.
32 communication with the EZ-TorQ III, configuration of the RS-232 port is required. 232 port is required.
A. Enter the About Tab B. Tap 5 times on the EZ-TorQ III area Enter the password 5809
(marked with red box) to enter into Calibration mode.
C. Tap Module button
Tech Support: (669) 200-4219 www.mountztorque.com
3
Made with FlippingBook Annual report maker