EZ-TorQ III Manual
1.3. Care - Make sure you always use the original USB 2A charging cable - Turn OFF Tester before connecting or disconnecting USB Cable. - For safety purposes, please make sure tester is mounted on surface before using it. Make sure you always use the original USB 2A charging cable that came with Tester. Turn OFF Tester before connecting or disconnecting USB Cable. For safety purposes, please make sure tester is mounted on surface before using it. that came with Tester.
1.4. Layout
SD Card
RS-232 port
USB port
- 8Mb SD card for test data saving with auto folder creating of Year, Month - Mini USB port is used for battery charging and data download test data saving with auto folder creating of Year, Month Mini USB port is used for battery charging and data download data download (Available as of October 2025) Mounting bolts (two built in M8 bolts) - tighten to 45 lbf.in - RS-232 port for data download - Mounting bolts (two built in M8
MB-1 Mounting Bracket Item # 062109
1.5. Dimensions
Battery Life and Maintenance
The torque analyzer uses Li follow standard Li-ion battery usage and maintenance guidelines.
uses Li-Ion batteries, which ion battery usage and
1. Avoid full discharging or full charging. We recommend using and charging the 20% to 80% range. Avoid full discharging or full charging. We recommend using and charging the battery within
2. For long-term storage, it is best to keep the battery at approximately 50% charged. term storage, it is best to keep the
3. Typical charge-discharge cycle lifespan is approximately 500 to 1000 discharge cycle lifespan is approximately 500 to 1000 cycles.
4
Made with FlippingBook Annual report maker