EZ-TorQ III Manual
A run down adapter is required when testing power tools with the EZ These are joint simulators that provide consistent and reliable torque readings for use with power-driven torque control tools. A run down adapter reduce the impact and irregular peaks that cause poor repeatability. testing power tools with the EZ-TorQ III. driven torque control tools. A run down adapter reduce the impact
Operating Run Down Adapter for E The run down adapter is mounted in-line between the tool drive and the transducer of the EZ-TorQ. EZ-TorQ III (1i - 5i models) line between the tool drive and the
The run-down adapter must be mounted securely before operating, as it is critical to ensure the accuracy of torque measurements during operation. Tighten the three 1.5mm hex screws EZ down adapter. down adapter must be mounted securely before operating, as it is screws EZ-TorQ's 1/4" drive to secure the run
The run down adapter is designed to operate in a clockwise direction only. Before each test, the run down adapter should be completely backed Before each test, the run down adapter should be completely backed-up.
Tighten the t
three 1.5 mm hex screws
Apply torque until RDA is run down entirely. Th with the analyzer. Apply torque until RDA is run down entirely. Then, save the torque reading
Operating Run Down Adapter for E The run down adapter is mounted in-line between the tool drive and the transducer of the EZ-TorQ. EZ-TorQ III (10i - 300i models) line between the tool drive and the
Insert the run-down adapter into the EZ-
-TorQ's 17mm hex drive.
The run down adapter is designed to operate in a clockwise direction only. Before each test, the run down adapter should be completely backed Before each test, the run down adapter should be completely backed-up.
Apply torque until RDA is run down entirely. Th with the analyzer. Apply torque until RDA is run down entirely. Then, save the torque reading
Insert run down
n adapter in 17mm hex drive
Warning: EZ-TorQ III is not for use in testing Impact or Pulse type tools. ot for use in testing Impact or Pulse type tools.
Tech Support: (669) 200-4219 www.mountztorque.com
5
Made with FlippingBook Annual report maker