Calibrating Cam-Over Wrench To calibrate the cam-over wrench, either use a over wrenches, calibrate torque in "Peak" mode with a torque tester or torque sensor. Make sure to apply the torque slowly and smoothly. 1. Select a torque tester or torque sensor that tester or torque sensor. Use the appropriate adapters as needed. 2. Apply torque clockwise slowly until the 3. Adjust the wrench to the required torque sett 4. Test and repeat adjustments as necessary to obtain desired torque value. 5. Recalibrate the cam-over wrench at prescribed intervals. over wrench, either use a torque analyzer or torque sensor within the torque wrench's range. For cam Select a torque tester or torque sensor that covers the torque range of the wrench. Connect the wrench to the torque the wrench ‘slips’ and note reading. Adjust the wrench to the required torque setting as described above. Test and repeat adjustments as necessary to obtain desired torque value. at prescribed intervals. torque analyzer or torque sensor within the torque wrench's range. For cam- covers the torque range of the wrench. Connect the wrench to the torque
Maintenance Schedule Like an automobile, torque wrenches contain moving parts that require periodic se
contain moving parts that require periodic servicing and lubrication. rvicing and lubrication.
Period Between Resetting of Torque 10,000 fastening operations. It is acknowledged that some tools may achieve time. Under these circumstances, the user may decide, with the benefit of their experience, to increase the p calibration intervals. Routine Maintenance After 50,000 operations, strip, clean, and re- should be replaced. Note: Any tool that is dismantled during its life must be re clean tools by immersing them in a solvent, as this will destroy the internal lubrication and cause ,000 fastening operations. It is acknowledged that some tools may achieve 10,000 operations in a relatively short period of the user may decide, with the benefit of their experience, to increase the p ,000 operations in a relatively short period of the user may decide, with the benefit of their experience, to increase the period between -grease the spring, bearings and internal components. Any worn components grease the spring, bearings and internal components. Any worn components Any tool that is dismantled during its life must be re-lubricated in accordance with the Mountz recommendations. Do not solvent, as this will destroy the internal lubrication and cause tool's failur lubricated in accordance with the Mountz recommendations. Do not tool's failure.
Testing and Servicing Torque tools go out of calibration with use. Calibrating a torque tool is a fine tolerance. Regular torque calibration of a cam international standards. We recommend a general once a year calibration interval. must determine suitable intervals based on equipment performance, application, degree of usage, and management objectives. Mountz Calibration and Repair Services Mountz Inc. features an experienced calibration and repair staff. Our trained technicians can calibrate and repair almost any tool. Mountz provides rapid service with quality that you can trust as we offer three state-of-the-art calibration lab We recommend a general once a year calibration interval. However, the user’s organization ust determine suitable intervals based on equipment performance, application, degree of Repair Services most any tool. Mountz provides rapid service with quality that you can art calibration labs and repair facilities.
Torque tools go out of calibration with use. Calibrating a torque tool is a fine-tuning process of bringing the tool
cam-over wrench ensures accuracy, repeatable tool performance, and adherence to tuning process of bringing the tool back within its ensures accuracy, repeatable tool performance, and adherence to
Mountz Service Locations
Eastern 19051 Underwood Rd. Eastern Service Center Foley, AL 36535 Phone: (251) 943 Fax: (251) 943 Phone: (251) 943-4125 Fax: (251) 943-4979 Western Service Center 1080 N.11th Street San Jose, CA 95112 Phone: (408) 292 Fax: (408) 292 UK Service Center Pier Copse Courtyard, Milland Lane, Liphook, Hampshire, GU30 7JN, UK Phone: 00 44 1428 741756 Phone: (408) 292-2214 Fax: (408) 292-2733
About Mountz Mountz, The Torque Tool Specialists ® , has been a leader in the torque
, has been a leader in the torque tool industry for 58
years. Engineered in the Silicon Valley and serving the globe, Mountz focuses on delivering high-quality torque products, services, and solutions to ensure customers can always proceed with confidence. We are committed to forging a sa accuracy and by innovating every day. quality torque products, services, and solutions to ensure customers can always proceed with confidence. We are committed to forging a safer world through precision and
www.mountztorque.com
SILICON VALLEY HEADQUARTERS 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292-2214 | Fax: (408) 292-2733 | mountztorque.com
2
Made with FlippingBook Annual report maker