ATTACHING STAIR SWIVEL/COMPOUND SWIVEL BRACKETS AND RAILS TO POSTS AND PRESSURE-TREATED POST AND POST SLEEVES/ CONTINUED TREX SIGNATURE® 12 Mounting Holes 15
2
1
1
3
12. Remove upper stair rail from balusters and center upper stair swivel bracket on post above the marked line and attach using four self-tapping screws (provided) .
15. Attach “crowned” upper stair rail cover to upper stair rail by aligning cover on one side of rail. Then starting from one end of stair rail, snap cover onto opposing slot working down length of stair rail. GENTLE tapping with a rubber mallet may facilitate fastening.
13
Installing Balusters into Bottom Stair Rail 16. Place balusters into holes in lower stair rail by snapping fully into place. In some cases, GENTLE tapping with a rubber mallet may facilitate fastening. Attaching Upper Stair Rails 17. Working from one end of upper stair rail, snap balusters into upper stair rail working down length of rail.
Standard post
16
Standard post
13. Cut top rail along with rail insert to the measurement between the top stair swivel brackets. For standard post to standard post configurations this would be same dimensions as that of the bottom stair rail. 14. Mark and cut top rail
17
14
cover same length as top rail for all top rail configurations.
Top rail
18. Attach top stair rail to top stair bracket (all types) using two self-tapping screws
18
(provided) on each side of stair bracket.
109 NOTE: Construction methods are always improving. Please refer to www.trex.com for the most up-to-date installation requirements.
Made with FlippingBook - Online Brochure Maker