ATTACHING STAIR SWIVEL/COMPOUND SWIVEL BRACKETS AND RAILS TO POSTS AND PRESSURE-TREATED POST AND POST SLEEVES/ CONTINUED TREX SIGNATURE® Attachment of Stair Bracket Covers, Skirts, and Caps
22
21
2
19
20 Trex
Trex Signature ™ post ®
Signature post
Post sleeve
2
1
3
4
21. Attach post caps to Trex Signature posts (use of rubber mallet may be required for secure attachment). 22. Attach post caps to post sleeves using external grade PVC construction adhesive (apply adhesive on the inside self-centering/corner tabs).
19. Attach corresponding bracket covers over opening in upper and bottom rails. 20. Attach provided post skirt to bottom of posts when using Trex Signature posts.
ATTACHING CROSSOVER SWIVEL BRACKETS ON SIGNATURE POSTS TREX SIGNATURE
1. Follow previous instructions for installation of lower stair rail into either fixed or swivel brackets. 2. Place two balusters into lower stair rail at each end of post. 2
4. Follow previous instructions marking and installation of either fixed or swivel bracket where this is required.
Attaching Stair Crossover Swivel Bracket to Post
5
Bracket cover
3
5. Insert stair crossover swivel bracket into post.
NOTE: Keep the bracket cover on when inserting this into post, this will cover the screw attachment area.
3. Position top stair rail onto balusters ensuring balusters are fully seated in top rail (position to side of post) and ENSURE that balusters are parallel with post.
110
NOTE: Construction methods are always improving. Please refer to www.trex.com for the most up-to-date installation requirements.
Made with FlippingBook - Online Brochure Maker