TREX SIGNATURE ® HORIZONTAL PANELS
NOTES: » TREX SIGNATURE RAILINGS ARE DESIGNED TO BE ATTACHED WITH POSTS INSTALLED AT A CLEAR SPAN OF 6' (1.83 M) OR 8' (2.44 M). THUS THESE RAILING SPANS MUST BE INSTALLED OVER THE DECKING FRAME OR ON INSIDE OF RIM JOIST. » IF INSTALLING AT EXACT SPAN LENGTHS OF 6' (1.83 M) OR 8' (2.44 M), AND USING POST-TO-POST CONFIGURATION, THE BOTTOM RAIL WILL NOT NEED TO BE CUT, BUT THE TOP RAIL WILL NEED TO BE MEASURED AND CUT. » IF INSTALLING AT EXACT SPAN LENGTHS OF 6' (1.83 M) OR 8' (2.44 M), AND USING CROSSOVER POST CONFIGURATION (SPANS FROM ONE CROSSOVER POST TO ANOTHER CROSSOVER POST), BOTH THE BOTTOM RAIL AND TOP RAIL WILL NOT NEED TO BE CUT. » IN ADDITION, AT ALL FINAL END POST CONFIGURATIONS, TOP RAIL WILL NEED TO BE MEASURED AND CUT. » SEE INFORMATION WITHIN DETAILED INSTRUCTIONS FOR MORE INFORMATION. » SEE PAGE 71 FOR SKU NUMBERS.
PARTS
TOOLS NEEDED
H
H
I
A
C
G G
J
I. Trex Signature upper rail bracket and cover J. Trex Signature lower rail tabless bracket and cover * Covers are slightly longer to accommodate crossover post applications. ** Item not included in Trex Signature Panel kits. Both 4" x 4" (102 mm x 102 mm) and 6" x 6" (152 mm x 152 mm) post sleeves are designed to fit over 4" x 4" pressure-treated post. *** Required ONLY for all clear span applications over 6' (1.83 m) when fixed baluster is centered or unsupported spans greater than 5' (1.52 m). For example, if an 8' (2.44 m) panel is cut into a 5-1/2' (1.68 m) section, it would require a Foot Block due to the off-center placement of the fixed baluster. NOTE: If installing 42" (1067 mm) railing, and using pressure- treated posts with Trex post sleeves, ensure that a longer pressure-treated post is used along with longer post sleeve, both cut to a height of 46" (1168 mm) from decking surface. NOTES: » Assembled Trex Signature Panels DO NOT come with Foot Blocks. You must purchase Foot Blocks separately. SKU – BKALFTBLK (one per panel required on spans greater than 6', see note below***). » Assembled Trex Signature Panels DO NOT come with brackets and screws. You must purchase the horizontal rail hardware separately. SKU – BKFHBKTALPNL (one per panel).
B
D
E
F
F
A. Trex Signature upper rail cover* - 6 ' (actual length 73-1/2" [1867 mm]) - 8 ' (actual length 97-1/2" [2477 mm]) B. Trex Signature Panel (includes top and bottom railings and square balusters) C. Crossover bracket cover (supplied with crossover post) D. Trex Signature crossover post**
- 36 " (actual length 34-1/2" [876 mm]) - 42 " (actual length 40-1/2" [1029 mm]) E. Trex Signature Foot Block*** F. Trex Signature post skirt or post sleeve skirt** G. Trex Signature post** 2-1/2 "
- 36 " (actual length 37" [940 mm]) - 42 " (actual length 43" [1092 mm]) or Trex 4x4 post sleeve**
- 36" (actual length 40" [102 cm]) - 42" (actual length 46" [117 cm]) H. Trex Signature post cap or post sleeve cap**
120
Made with FlippingBook - Online Brochure Maker