HOW TO INSTALL HORIZONTAL PANELS TREX SIGNATURE ®
NOTE: » FOR POST INSTALLATIONS, SEE PAGES 76-77 FOR DETAILS » FOR EASE OF INSTALLATION, IT IS RECOMMENDED THAT YOU USE THE Trex Signature RAIL TEMPLATES TO ATTACH BRACKETS (SOLD SEPARATELY).
Attach Brackets Using Trex Signature Posts TIP: Use a clamp to help hold brackets in place while fastening with screws.
Attach Brackets Using Pressure-Treated Posts and Post Sleeves TIP: Use a clamp to help hold brackets in place while fastening with screws.
1
1. Measure 1-3/8"
1
(3.5 cm) from top of post base plate or 1-7/8" (4.8 cm) from decking surface. Mark with light line.
1. Measure 1-7/8"
(4.8 cm) up from deck surface to bottom of bracket. Mark with light line.
1-3/8" (3.5 cm)
1-7/8" (4.8 cm)
2
3
2
3
33-7/16" (84.9 cm) or 39-7/16" (100.2 cm)
33-15/16" (86.2 cm) or 39-15/16" (101.4 cm)
2. M easure up from post base plate 33-7/16" (84.9 cm) for 36" (92 cm) rail height or 39-7/16" (100.2 cm) for 42" (107 cm) rail height. Mark with light line. NOTE: If measuring from decking surface, measure up 33-15/16" (86.2 cm) for 36" (92 cm) rail height or 39-15/16" (101.4 cm) for 42" (107 cm) rail height. 3. C enter lower bracket on post above the marked line and attach using two self-tapping screws (provided) . 4. Center upper bracket on post above marked line 4
2. M easure up from decking surface 33-15/16" (86.2 cm) for 36" (92 cm) rail height or 39-15/16" (101.4 cm) for 42" (107 cm) rail height. Mark with light line. 3. C enter lower bracket on post above the marked line and attach using two 2" (51 mm) wood screws (provided) . 4. C enter upper bracket
4
on post above marked line and attach using three 2" (51 cm) wood screws (provided) .
and attach using (3) self-tapping screws (provided) .
NOTE: Upper bracket is not required on
crossover post configuration.
121 NOTE: Construction methods are always improving. Please refer to www.trex.com for the most up-to-date installation requirements.
Made with FlippingBook - Online Brochure Maker