TREX SIGNATURE ® STAIR PANELS
NOTES: » FOR A 6' OR 8' STAIR RAIL, POST TO POST SPAN WILL BE LESS THAN 6' OR 8'. PRIOR TO INSTALLING STAIR POSTS CALCULATE POST TO POST SPAN USING A MAXIMUM STAIR RAIL LENGTH REQUIRED AND THE ANGLE (32°-37°) AT WHICH THE STAIR RAILS WILL BE INSTALLED DO NOT INSTALL STAIR POSTS AT 6' OR 8' SPAN, AS STAIR RAILINGS WILL THEN BE TOO SHORT. » TREX SIGNATURE POSTS CANNOT BE USED WITH TREX SIGNATURE TRADITIONAL OR TREX SIGNATURE COCKTAIL STAIR DESIGNS, ONLY PRESSURE-TREATED POST/POST SLEEVES CAN BE USED. REFER TO DETAILED INSTRUCTIONS FOR MORE INFORMATION. » Assembled Trex Signature Stair Panels DO NOT come with brackets and screws. You must purchase the stair rail hardware separately (sku BKFSBKTAL) (one per panel). » All Trex Signature stair installations require the use of 53" (134.6 CM) stair post, measured and cut to appropriate length if required. » If crossover stair post is required, use stair post (again cut to appropriate length if required) and use swivel crossover bracket. » Trex Signature Stair fixed brackets are designed to work only with stair slopes of 32°-37°. For smaller (less than 32°) or larger angles (greater than 37°), use the Trex Signature Stair Swivel brackets. » At all final end post configurations, top stair rail will need to be measured (making sure balusters line up vertically) and cut. » SEE PAGE 71 FOR SKU NUMBERS.
PARTS
TOOLS NEEDED
F
A
E
E
7/64" (2.8 mm)
G
D D
H
C
C
A. Trex Signature Stair Panel (includes top and bottom railings and square balusters) B. Trex Signature Foot Block (not shown)*** C. Trex Signature post skirt or post sleeve skirt** D. Trex Signature post**
F. Trex Signature upper stair rail fixed bracket and cover G. Trex Signature lower stair rail fixed bracket and cover * Covers are slightly longer to accommodate crossover post applications. ** Item not included in Trex Signature Stair Panel kits. Both 4" x 4" (102 mm x 102 mm) and 6" x 6" (152 mm x 152 mm) post sleeves are designed to fit over 4" x 4" pressure-treated post. *** Foot Blocks for stairs are sold separately and recommended for use in Signature Cocktail and Signature Traditional stair applications over 6'.
- 36 " (actual length 37" [940 mm]) - 42 " (actual length 43" [1092 mm]) or Trex 4x4 post sleeve**
- 36" (actual length 40" [102 cm]) - 42" (actual length 46" [117 cm]) E. Trex Signature post cap or post sleeve cap**
126
Made with FlippingBook - Online Brochure Maker