HOW TO INSTALL TREX SIGNATURE ® STAIR PANEL USING STAIR SWIVEL/COMPOUND SWIVEL BRACKETS TREX SIGNATURE ®
4
Attaching Signature Stair Panel using Fixed Stair Brackets
1
1. Use a 1" deck board as a spacer board and lay this on the stair treads between the posts. Place stair panel on top of the deck board and clamp stair panel to posts. Ensure that balusters are straight and posi- tioned with equal spacing at post locations.
4. After lower swivel brackets are installed clamp panel to posts in same location as before, again ensuring balusters are parallel and evenly spaced between posts.
Installing Lower Stair Swivel or Compound Brackets
5
2
2. Mark where lower swivel brackets are to be attached to both posts. Mark posts at underside of railing.
5. With lower swivel brackets in correct locations, measure distance from inside of swivel bracket to inside of swivel bracket. Ensure balusters are paral- lel and centered in between the posts and also allow for clearance for attachment of brackets. Mark both lower and upper rail at this distance.
3
Mounting Holes
1
3. Center lower stair swivel brackets on posts above the marked line and attach using four self-tapping screws (provided). In some cases it may be difficult to attach the stair bracket on the lower stair post. A 90° cordless drill is recommended to attach screws in this area.
130
Made with FlippingBook - Online Brochure Maker