HOW TO INSTALL TREX SIGNATURE ® STAIR PANEL USING STAIR SWIVEL/COMPOUND SWIVEL BRACKETS/ CONTINUED TREX SIGNATURE ®
Cutting Stair Panel Rails:
Mounting Holes
9
6
1
9. Remove stair panel and center upper swivel brack- ets on post above marked line and attach using four self-tapping screws (provided).
6. Remove panel and place on flat surface. Cut each end of the bottom and top stair rails on marked location. NOTE: Railing does not need to be cut at angle. Brackets are designed to allow for railing to be installed with standard straight cut.
10
7
10. Set stair panel into lower and upper swivel brackets. Attach stair panel to brackets using two self-tapping screws (provided) on each side of stair bracket.
1
Attachment of Stair Bracket Covers, Skirts, and Caps
11
12 Trex
1
Signature post
2
7. Set stair panel into lower swivel brackets.
4
8
11. Attach corresponding bracket covers over opening in upper and bottom rails. 12. Attach provided post skirt to bottom of posts when using Trex Signature posts.
8. Temporarily place upper swivel brackets on top rail and mark location on posts at underside of the brackets.
131
NOTE: Construction methods are always improving. Please refer to www.trex.com for the most up-to-date installation requirements.
Made with FlippingBook - Online Brochure Maker