TREX SIGNATURE ® HORIZONTAL ROD RAILING RAILING CONFIGURATIONS Note: See specific installation instructions for attachment of Trex post mounts or Trex Joist Mount Posts prior to installing any railing.
Cutting posts/post sleeves is NOT required. A. Trex Signature post, pressure-treated post/Trex 4x4 or 6x6 post sleeve, Trex post mount/Trex 4x4 post sleeve, or Composite Joist Mount Post/Trex 4 x 4 post sleeve (Inside mount), or Signature Joist Mount Post(Span of 6' or less only)* B. Trex Signature top rail C. Trex Signature bottom rail See page 139 for “How to Install Standard Rod Railing".
Standard
B
A
C
Post sleeves will need to be cut. A. Pressure-Treated post with Trex post sleeve NOTE: » Only for use with 4x 4 (102 mm x 102 mm) post sleeve.
Cocktail
POST SLEEVES WILL NEED TO BE CUT
B
E
C
» Trex Signature Posts, Trex Post Mounts or Joist Mount Posts cannot be used with Trex Signature Cocktail design.
A
B. Deck board top rail. NOTE: Enhance cannot be used. C. Trex Signature top rail D. Trex Signature bottom rail E. Trex Signature Cocktail Rail Bracket** See page 143 for “How to Install Rod Rail Cocktail Railing".
D
Traditional
Cutting posts/post sleeves is Not required. A. Pressure-Treated post/Trex 4x4 or 6x6 post sleeve, Trex post mount/Trex 4x4 post sleeve, or Joist Mount Post/Trex 4x4 post sleeve* NOTE: » Trex Signature Posts or Trex Signature Joist Mount Posts cannot be used. B. 2 x 4 lateral top rail C. Trex Signature top rail D. Trex Signature bottom rail E. Trex Signature Cocktail Rail Bracket** See page 145 for “How to Install Rod Rail Traditional Railing".
B
E
C
A
D
» NOTES: For post installations refer to page 77-78.
** Trex Signature Cocktail Rail brackets (sold separately) are for use with either Trex Rod Rail Traditional or Trex Rod Rail Cocktail designs. For a 6' section, use 4 brackets and screws provided, for 8' section, use 5 brackets and screws provided.
135
Made with FlippingBook - Online Brochure Maker