HOW TO INSTALL ROD RAIL STANDARD STAIR RAILING TREX SIGNATURE ®
29
27
29. Place base (smaller side facing down) on decking surface. Pre-drill using a 3/16" bit. Attach base of Foot Block using one screw at an angle through base and into decking.
2
30
30. After attached, use a rubber mallet along with scrap piece of
27. Install top rail to all vertical and end supports using ST Wedge Spacer and screws provided.
wood to tap Foot Block until it locks into place.
Attachment of Foot Block (where recommended)
28
31
4
2
28. Temporarily drop assembled stair rod rail panel into brackets. To ensure proper location place Foot Block towards the nose of the stair tread along the side of the bottom rail. Mark location of angle on Foot Block and cut on mark. Then place Foot Block under the center of the bottom rail. Mark placement location of the base.
31. Drop assembled stair rod rail panel into brackets.
32
Attaching Stair Panel to Brackets
32. Attach bottom stair rail to bottom stair bracket using two self-tapping screws (provided) on each side of bracket.
152
Made with FlippingBook - Online Brochure Maker