HOW TO INSTALL ROD RAIL STAIR CROSSOVER SWIVEL BRACKETS TREX SIGNATURE ®
1. Cutting
5
5. Set bottom stair rail into bottom stair rail fixed brackets.
Bottom Rail See instructions on page 148.
2. Install Lower Fixed Stair Brackets
See instructions on page 148. NOTE: These are installed on all posts, including the center crossover post.
Determining Placement of Stair Crossover Swivel Bracket 6. Insert stair crossover swivel bracket into post. 6
Install Upper Fixed Stair Brackets NOTE: When using a center crossover post the, upper fixed stair brackets will only be installed at the terminating upper and lower post, and not the center crossover post.
NOTE: Keep the bracket cover on when inserting this into post, this will cover the screw attachment area.
Bracket cover
3
36" – 33-1/8" 42" – 39-1/8"
36" – 33-1/4" 42"– 39-1/4"
7
Upper post
X°
Lower post
3. On Lower Post – From top of lower bracket, measure up and mark with light line (33-1/4" for 36" rail; 39-1/4" for 42" rail). On Upper Post – From top of lower (upper) bracket, measure up and mark with light line (33-1/8" for 36"rail; 39-1/8" for 42" rail).
4
7. Determine location/height of the stair crossover swivel bracket by aligning the angle of this with the fixed brackets already installed. Note that the crossover post may need to be cut to ensure the top stair rail is parallel to the bottom stair rail.
Upper stair bracket – top rail
1
1
Lower stair bracket – top rail
4. Center upper stair brackets on posts below the marked lines and attach using two self-tapping screws (provided) .
154 NOTE: Construction methods are always improving. Please refer to www.trex.com for the most up-to-date installation requirements.
Made with FlippingBook - Online Brochure Maker