Trex® Full Installation Guide

HOW TO INSTALL ROD RAIL STAIR CROSSOVER SWIVEL BRACKETS/ CONTINUED TREX SIGNATURE ®

17. Attachment of Bracket Covers, Skirts, and Caps See instructions on page 153.

16. For stair crossover post configuration, fasten upper stair rail to swivel crossover post bracket by installing screws diagonally through crossover stair bracket into upper rail using two self-tapping screws (provided) on each side.

16

HOW TO INSTALL COCKTAIL ROD RAIL STAIR RAILING TREX SIGNATURE ®

1. Installing Pressure-Treated Posts, Post Sleeves and Skirts to Use with Trex Signature Railing See instructions on page 102. 2. Installing Brackets Follow previous stair instructions for the installation of desired brackets, making sure that all dimensions are calculated before installation, and ensuring deck board is placed in correct location.

Cutting Top Stair Rail

NOTE: THE TOP RAIL AND TOP RAIL COVER WILL NEED TO BE CUT AT APPROPRIATE ANGLE ON THE END OF THE RAIL

IMPORTANT NOTES: » Only for use with pressure-treated 4x4 post (3.5" nominal square) and 4x4 (102 mm x 102 mm) post sleeve. Trex Signature posts, Trex post mounts or joist mount posts cannot be used with Trex Signature Cocktail Rod Rail stair railing. Cutting post and post sleeve only applies to the Cocktail style railing. » DO NOT CUT LOWER POST/POST SLEEVES UNTIL ROD RAIL STAIR PANEL IS FULLY INSTALLED. » When referring to previous instructions referenced, disregard all crossover post instructions as these cannot be used with Cocktail railing. » THE DECK BOARD USED IN COCKTAIL ROD RAIL STAIR WILL NEED TO TERMINATE AT THE UPPER STAIR POST AS SHOWN ABOVE. THE DECK BOARD WILL HAVE TO BE TOENAILED INTO THE SIDE OF THE POST IN THESE AREAS USING 2 APPROPRIATE COMPOSITE DECKING SCREWS – PRE-DRILLING IS RECOMMENDED. » Do Not use Enhance for top board.

Post

THAT CONNECTS TO THE UPPER FIXED BRACKET, SO THAT WHEN THE RAIL IS INSTALLED IT SITS FLUSH WITH THE END OF THE BRACKET AS SHOWN.

Top stair rail

Upper bracket

1. Follow all Rod Rail Stair instructions for the assembly of the rod rail stair panel.

156

Made with FlippingBook - Online Brochure Maker