HOW TO INSTALL HORIZONTAL SWIVEL BRACKETS TREX SIGNATURE ®
Attach Swivel Brackets Base Using Trex Signature Posts NOTE: For bottom rail installation, use the Signature Horizonal Bottom Swivel Tabless Bracket.
Attach Swivel Brackets Using Pressure-treated Posts and Post Sleeves TIP: Use a clamp to help hold brackets in place while fastening with screws.
2
TIP: Use a clamp to help hold brackets in place while fastening with screws.
1
1. Measure 1-3/8"
1-7/8" (4.8 cm)
1
(3.5 cm) from top of post base plate or 1-7/8" (4.8 cm) from decking surface. Mark with light line.
2-1/2" Post
1-3/8" (3.5 cm)
1. Measure 1-7/8" (4.8 cm) up from deck surface to bottom of bracket. Slide skirt up to allow for proper measurement, then push skirt back down onto surface of decking BEFORE ATTACHING BRACKET. Mark with light line. 2. Center lower bracket on post above the marked line and attach using four 2" (5.1 cm) wood screws (provided) .
2
3
32-5/16" (82.0 cm) or 38-5/16" (97.3 cm)
3
4
32-5/16" (82.0 cm) or 38-5/16" (97.3 cm)
2. Center lower bracket on post above the marked line and attach using four self-tapping screws (provided) . 3. Measure up 32-5/16" (82.0 cm) for 36" (91.4 cm) tall railing or 38-5/16" (97.3 cm) for 42" (106.7 cm) tall railing from top of lower rail bracket. Mark with a light line. 4. Center upper bracket on post below marked line 4
3. Measure up 32-5/16" (82.0 cm) for 36" (91.4 cm) tall railing or 38-5/16" (97.3 cm) for 42" (106.7 cm) tall railing from top of lower rail bracket. Mark with a light line. 4. Center upper bracket on post below marked line and attach using four 2" (5.1 cm) wood screws (provided) .
and attach using four self-tapping screws (provided) .
NOTE: Upper bracket is not required on
crossover post configuration.
161
Made with FlippingBook - Online Brochure Maker