HOW TO INSTALL STANDARD HORIZONTAL GLASS RAILING/ CONTINUED TREX SIGNATURE ®
Installing Top Head Gasket and Top Rail
Attaching Top Rail to Brackets
16
18
16. Install top head gasket onto the top of the glass panel. Note that the gasket may be loose at this stage.
18. Drill two 1/2" holes approximately 1/2" from end of top rail. Repeat this on opposite side of top rail.
1/2" (1.3 cm)
17
IMPORTANT NOTES: » HOLES CANNOT EXTEND PAST BRACKET,
Bracket Edge
Post
OTHERWISE BRACKET COVER WILL NOT COVER HOLES. » ONLY DRILL 1/2" HOLES THRU TOP WALL OF TOP RAIL. DO NOT USE A STEP BIT.
19
17. Starting at one end and working down, press the top rail firmly onto the top of the glass panel (with top head gasket on glass). Ensure the top rail is centered properly and top rail will seat into brackets when finished.
19. Using 9/64" bit provided, center
into above holes and PREDRILL into top rail bracket at a depth of approximately 1-1/4". Use care to not drill through underside of top bracket.
1-1/4" (3.2 cm)
164 NOTE: Construction methods are always improving. Please refer to www.trex.com for the most up-to-date installation requirements.
Made with FlippingBook - Online Brochure Maker