HOW TO INSTALL STANDARD HORIZONTAL GLASS RAILING/ CONTINUED TREX SIGNATURE ®
20
Attachment of Bracket Covers, Skirts, and Caps
22
23
Trex Signature ™ post ®
1
2
22. Attach corresponding bracket covers over opening in top and bottom rails. 23. Attach provided post skirt to bottom of posts when using Trex Signature posts.
20.Install two #8 x 1-1/4" screws provided into top rail and top bracket on each end of top rail.
Installing Snap-in Channel Filler
24a
24b
21
® Trex Signature ™ post
Post sleeve
24a.Attach post caps to Trex Signature posts. (Use of rubber mallet may be required for secure attachment.) 24b.Attach post caps to post sleeves using external grade PVC construction adhesive (apply adhesive on the inside self-centering/corner tabs).
21.Cut snap-in channel filler to correct length and install into channels of bottom and top rails. Use of a rubber mallet may assist with this step. DO NOT attempt to cut short snap-in pieces with a miter saw. Use an angle grinder or hack saw only.
165
Made with FlippingBook - Online Brochure Maker