HOW TO INSTALL HORIZONTAL MESH RAILING BRACKETS TREX SIGNATURE ® Installing Posts REFER TO DETAILED INSTRUCTIONS ON HOW TO INSTALL TREX SIGNATURE POSTS OR PRESSURE TREATED POSTS. NOTES: » FOR EASE OF INSTALLATION, IT IS RECOMMENDED TO USE THE TREX SIGNATURE RAIL TEMPLATES TO ATTACH BRACKETS (SOLD SEPARATELY). » TREX SIGNATURE POSTS (BLACK ONLY) CAN ALSO BE PURCHASED SEPARATELY WHICH HAVE BRACKETS PREINSTALLED, THUS SKIPPING STEPS 1-4 BELOW. SKU NUMBER DESCRIPTION SKU NUMBER DESCRIPTION BKAL252537RCAPCNR Signature Post 37" Corner Post BKAL252537RCAPEND Signature Post 37" End Post BKAL252537RCAPLINE Signature Post 37" Inline Post BKAL252543RCAPCNR Signature Post 43" Corner Post BKAL252543RCAPEND Signature Post 43" End Post BKAL252543RCAPLINE Signature Post 43" Inline Post
Attach Brackets Using Pressure-Treated Posts and Post Sleeves TIP: Use a clamp to help hold brackets in place while fastening with screws.
Attach Brackets Using TrexSignature Posts TIP: Use a clamp to help hold brackets in place while fastening with screws.
1
1
1. Measure 1-3/8" (3.5 cm) from top of post base plate or 1-7/8" (4.8 cm) from decking surface. Mark with light line.
1. Measure 1-7/8" (4.8 cm) up from deck surface to bottom of bracket. Slide skirt up
2-1/2" Post
1-3/8" (3.5 cm)
1-7/8" (4.8 cm)
to allow for proper measurement. Mark with light line.
2
3
2
3
33-7/16" (84.9 cm) or 39-7/16" (100.2 cm)
33-15/16" (86.2 cm) or 39-15/16" (101.4 cm)
2. Measure up from post base plate 33-7/16" (84.9 cm) for 36" (92 cm) rail height or 39-7/16" (100.2 cm) for 42" (107 cm) rail height. Mark with light line. NOTE: If measuring from decking surface, measure up 33-15/16" (86.2 cm) for 36" (92 cm) rail height or 39-15/16" (101.4 cm) for 42" (107 cm) rail height. 3. Center lower bracket on post above the marked line and attach using two self-tapping screws (provided) . 4. Center upper bracket
2. Measure up from decking surface 33-15/16" (862 cm) for 36" (92 cm) rail height or 39-15/16" (101.4 cm) for 42" (107 cm) rail height. Mark with light line.
NOTE: Push skirt back down onto surface of decking BEFORE ATTACHING BRACKETS.
3. Center lower bracket on post above the marked line and attach using two 2" (51 mm) wood screws (provided) . 4. Center upper bracket
4
on post above marked line and attach using (3) self-tapping screws (provided) . NOTE: Upper bracket is not required on crossover post configuration.
4
on post above marked line and attach using three 2" (51 cm) wood screws (provided) .
168
Made with FlippingBook - Online Brochure Maker