HOW TO INSTALL HORIZONTAL MESH RAILING SWIVEL BRACKETS TREX SIGNATURE ®
Attach Swivel Brackets Using Trex Signature Posts TIP: Use a clamp to help hold brackets in place while fastening with screws.
Attach Swivel Brackets Using Pressure-treated Posts and Post Sleeves TIP: Use a clamp to help hold brackets in place while fastening with screws.
1. Measure 1-3/8"
2
1
1
(3.5 cm) from top of post base plate or 1-7/8" (4.8 cm) from decking surface. Mark with light line.
2-1/2" Post
1-3/8" (3.5 cm)
1-7/8" (4.8 cm)
1. Measure 1-7/8" (4.8 cm) up from deck surface to bottom of bracket. Slide skirt up to allow for proper measurement, then push skirt back down onto surface of decking BEFORE ATTACHING BRACKET. Mark with light line. 2. Center lower bracket on post above the marked line and attach using four 2" (5.1 cm) wood screws (provided) .
2
3
32-5/16" (82.0 cm) or 38-5/16" (97.3 cm)
3
4
2. Center lower bracket on post above the marked line and attach using four self-tapping screws (provided) . 3. Measure up 32-5/16" (82.0 cm) for 36" (91.4 cm) tall railing or 38-5/16" (97.3 cm) for 42" (106.7 cm) tall railing from top of lower rail bracket. Mark with a light line. 4. Center upper bracket on post below marked line 4
32-5/16" (82.0 cm) or 38-5/16" (97.3 cm)
3. Measure up 32-5/16" (82.0 cm) for 36" (91.4 cm) tall railing or 38-5/16" (97.3 cm) for 42" (106.7 cm) tall railing from top of lower rail bracket. Mark with a light line. 4. Center upper bracket on post below marked line and attach using four 2" (5.1 cm) wood screws (provided) .
and attach using four self-tapping screws (provided).
169 NOTE: Construction methods are always improving. Please refer to www.trex.com for the most up-to-date installation requirements.
Made with FlippingBook - Online Brochure Maker