HOW TO INSTALL HORIZONTAL MESH RAILING/ CONTINUED TREX SIGNATURE ®
Centering the Mesh and Installing into Bottom Rail
Installing L-Brackets into Vertical Supports
17
15
Stop Tab
Stop Tab
17. Install L-brackets into both top and bottom slots of vertical supports as shown. L-brackets will require light tapping until stop lip of bracket is resting on vertical support. Installing Vertical PVC Gaskets onto Vertical Supports (No cutting required these come standard size.)
15. Center mesh (with bottom PVC gasket installed) so there is equal distance between sides of mesh and posts.
16
18
16. Starting at one end, push mesh (with bottom PVC gasket installed) firmly into the bottom rail. GENTLE tapping with rubber mallet on mesh CROSS-SECTIONS will help prevent mesh from bending.
18. Align and install vertical PVC gaskets into the vertical supports.
NOTE: Make sure mesh is being secured by hand until final assembly of the top rail.
172 NOTE: Construction methods are always improving. Please refer to www.trex.com for the most up-to-date installation requirements.
Made with FlippingBook - Online Brochure Maker