HOW TO INSTALL MESH STAIR RAILING/ CONTINUED TREX SIGNATURE ®
L-BRACKET ORIENTATION
20
2
D
C
1
1
B
A
20. Gently tap gasket into channel of bottom rail. Make sure that upper vertical is properly aligned with mark on bottom rail to ensure this is seated in correct location BEFORE attaching L-bracket. Attach L-bracket to bottom rail with two #8 x 5/8" flat head screws (provided).
Above is an overall image showing bracket orientation. The next steps will show in detail how to attach them. Refer to corresponding letters in the following steps.
A–Bottom Rail TOP POST LOCATION
B–Bottom Rail BOTTOM POST LOCATION Measuring for L-Brackets
A
19
21
B
1
2
3
21. AT BOTTOM POST LOCATION , place L-bracket into vertical and into channel of bottom rail (L-bracket should be oriented in same direction as previous L- bracket.) Ensure that vertical is seated fully flush with bottom rail, bracket is in the channel, and vertical is aligned with mark on rail.
Installing Gaskets and L-Brackets 19. At TOP POST LOCATION, slide L-bracket into end of gasket. Place gasket so it’s resting on the top of the channel (do not insert gasket fully into channel). Slide vertical onto L-bracket.
183
Made with FlippingBook - Online Brochure Maker