HOW TO INSTALL HORIZONTAL CABLE RAIL TREX SIGNATURE ® X-SERIES ™®
NOTES: » PLEASE READ ALL INSTRUCTIONS BEFORE BEGINNING INSTALLATION. USE ALL REQUIRED PARTS WHERE SPECIFIED. » X-SERIES HORIZONTAL CABLE RAIL IS ONLY COMPATIBLE WITH X-SERIES ANCHOR POSTS. IT CANNOT BE USED WITH STANDARD SIGNATURE POSTS OR PRESSURE-TREATED POSTS/POST SLEEVES. » X-SERIES HORIZONTAL CABLE RAIL IS DESIGNED TO BE INSTALLED AT A MAXIMUM CLEAR SPAN OF 6', 12', OR 18' BETWEEN X-SERIES ANCHOR POSTS. TOP RAILS DO NOT HAVE TO BE CUT FOR FULL-SPAN INSTALLATIONS. » X-SERIES ANCHOR POSTS MUST BE USED AT ALL CABLE TERMINATIONS. » ONLY X-SERIES ANCHOR POSTS CAN BE USED AT CORNERS. DO NOT USE PASS-THROUGH POSTS AT CORNERS. » USE COMPOUND SWIVEL BRACKETS FOR HORIZONTAL ANGLE INSTALLATIONS. REFER TO INSTRUCTIONS FOR ADDITIONAL DETAILS.
» X-SERIES HORIZONTAL CABLE RAIL CANNOT BE USED WITH TRADITIONAL OR COCKTAIL DESIGNS. » REFER TO TREX CARE AND CLEANING GUIDE FOR DETAILED CLEANING RECOMMENDATIONS.
Tools Required: • Please wear safety glasses during installation. • Note that tools are NOT included unless otherwise specified. – WD-40 Specialist® Corrosion Inhibitor ( RECOMMENDED for saltwater environments) – Min 18V drill – Min 18V impact driver (post install only) – Tape measure – 3/4" socket – Hammer – Level
– 9/16" drill bit – 9/64" drill bit (included) – Cable cutters – 5/32" Allen wrench – 3/32" Allen wrench – 1/8" Allen wrench – T-20 drive bit – Cable tension gauge
– Turnbuckle wrench (included) – Adjustable wrench (if needed) WD-40 Specialist® Corrosion Inhibitor is a registered trademark of WD-40 Company.
18' Horizontal Cable Rail Configuration
» (3) Cable Braces (w/ set screws included) » (1) Turnbuckle Wrench » (2) Post Mounting Hardware Packs (4) 1/2” x 6” SS Hex Bolts
» (2) X-Series Anchor Posts (sold separately) » (3) 6’ Top Rails » (1) Fixed Horizontal Bracket Pack (2) Top Rail Straight Brackets (1) Screw Pack (2) Top Rail Locking Assemblies (2) Top Inserts (1) 9/64" Drill Bit » (2) Pass-Through Posts » (2) Pass-Through Post Bracket Packs (1) Pass-Through Post Bracket (1) Barrel Bolt Pack (1) Screw Pack » (2) Cable Infill Adapters
(4) SS Washers (4) SS Tee Nuts » (2) Bolt Cap Packs (4) Inner Caps (4) Outer Caps » 18' Cable Assemblies
(Qty 10 for 36” height) (Qty 12 for 42” height)
195
Made with FlippingBook - Online Brochure Maker