HOW TO INSTALL HORIZONTAL CABLE RAIL/ CONTINUED TREX SIGNATURE ® X-SERIES ™
Inserting Cables into Cable Infill Adapters
5
3
4
Top
Approx. 3.25"
Approx. 2.5"
Bottom
3. Insert short cables into cable infill adapter as shown.
5. Slide cable infill adapters into X-Series Anchor Posts as shown.
4. Insert long cables into opposite cable infill adapter as shown.
IMPORTANT: Cable infill adapter should be inserted so that the hole closest to the end is at the bottom of the post. See dimensioned figure above to identify correct orientation of cable infill adapter.
199
NOTE: Construction methods are always improving. Please refer to www.trex.com for the most up-to-date installation requirements.
Made with FlippingBook - Online Brochure Maker