HOW TO INSTALL HORIZONTAL CABLE RAIL/ CONTINUED TREX SIGNATURE ® X-SERIES ™
Threading Long Cables Through Cable Brace(s) and Pass-Through Post(s)
6
2
Cable Brace
Cable Brace
Pass-Through Post
1
3
6. Remove cover on end of cable. Thread the top cable through the top hole in the cable brace. Continue to thread this same cable through the top hole in the Pass-Through Post (when required). If you have multiple spans, continue in this fashion. Next, thread the bottom cable in the same manner. After installing the top and bottom cables, slide the cable brace next to the Pass-Through Post. Tip: Tape cable brace to Pass-Through Post for easier installation of remaining cables.
7
2
1
2
7. Remove remaining cable covers and thread remaining cables through cable brace(s) and Pass-Through Post(s).
200
NOTE: Construction methods are always improving. Please refer to www.trex.com for the most up-to-date installation requirements.
Made with FlippingBook - Online Brochure Maker