HOW TO INSTALL HORIZONTAL CABLE RAIL/ CONTINUED TREX SIGNATURE ® X-SERIES ™
Inserting Brackets onto Top Rails
Pre-Drilling Top Rails at Bracket Locations
9
8
8. Insert all brackets as per steps 10a through 10c. Ensure that all brackets are fully seated.
9. Using a 9/64” drill bit, pre-drill at all bracket locations as shown. Note: Only pre-drill through the first layer of the rail and bracket.
Installing Top Rails and Brackets onto Posts
10a
3
3
1
Note: Cables removed from image above for clarity.
10a. For 18' spans (or spans that have 3 top rails), install center rail onto Pass-Through Posts first, then install outer rails on each side.
10b
3
1
Note: Cables removed from image above for clarity.
10b. For 12' spans (or spans that have 2 top rails), install first rail onto X-Series Anchor Post and Pass-Through Post, then install remaining rail.
201
Made with FlippingBook - Online Brochure Maker