HOW TO INSTALL HORIZONTAL CABLE RAIL/ CONTINUED TREX SIGNATURE ® X-SERIES ™
Fastening Top Rails to Brackets
Final Installation Steps
23
21
3
1
2
21. Install #8 x 1/2" screws into pre-drilled holes in top rails to fasten top rails to brackets at each Pass-Through Post and X-Series Anchor Post.
23. Install post caps and bolt caps to complete instal- lation. For bolt caps, align hex shadow line on inner cap with bolt head before installing outer cap.
Installing Top Inserts 22. Install top inserts into the open channel above each bracket in all X-Series Anchor Posts.
22
Installing Horizonal Cable Rail on an Angle
1. Follow all instructions as previously stated for stan- dard horizontal installation EXCEPT for where noted below.
NOTES: » COMPOUND SWIVEL BRACKETS (SOLD SEPARATELY) AND CABLES CAN ACCOMMODATE UP TO A 22.5˚ ANGLE FOR HORIZONTAL APPLICATIONS. » FOR LARGER ANGLES, POSTS MUST BE ANGLED ACCORDINGLY. EXAMPLE BELOW IS FOR A 45˚ ANGLE.
Measuring and Cutting Top Rails
2
2. Temporarily slide compound swivel bracket(s) into X-Series Anchor Posts.
205
Made with FlippingBook - Online Brochure Maker