HOW TO INSTALL STAIR CABLE RAIL TREX SIGNATURE ® X-SERIES ™
Measuring and Cutting Cable Infill Adaptors
6
5. Use the cut dimension calculated in step 4 to establish the bottom of each cable infill adapter. At one end of the cable infill adapter, measure from the edge of the hole closest to the end, and mark and cut at this location. Repeat for each cable infill adapter. Important Notes: » Stair cable infill adapters are reversible and can be cut from either end for the first cut. » Be sure to designate which cable infill adapter goes with each post. Mark location and orientation of each cable
5
Downward
Downward
Upward
Upward
infill adapter after cutting.
Cut dimension calculated in step 4
2"
3-3/8"
6. Cut the opposite end of each cable infill adapter to establish the top. » For downward facing cable infill adapters, measure up 2" from top of top hole 2" and cut. » For upward facing cable infill adapters, measure up 3-3/8" from top of top hole and cut. Important Note: Do Not throw away these cut pieces as these will be used later.
Downward Facing Infill Adapters
Upward Facing Infill Adapters
209
Made with FlippingBook - Online Brochure Maker