HOW TO INSTALL STAIR CABLE RAIL TREX SIGNATURE ® X-SERIES ™
Installing Compound Swivel Brackets in X-Series Anchor Posts
15d
15c
14
15c. Slide the bracket down until it sits on the cable infill adapter. Note that the screw in the locking assem- bly may need to be loosened to allow the locking assembly to fit properly in the X-Series Anchor Post.
15d. Tighten screw in locking assembly using a 5/32” Allen wrench.
Threading Long Cables Through Cable Brace
16
Note: Cables removed from image above for clarity. 14. I nstall top rail onto X-Series Anchor Posts.
15a
1
15a. Position the compound swivel bracket PARTIALLY into the X-Series Anchor Post as shown.
15b. Slide top rail locking assembly onto the dovetail on the top of both brackets.
Cable Brace
15b
16. Remove cover on end of each cable. Thread cables through the holes in the cable brace.
212
NOTE: Construction methods are always improving. Please refer to www.trex.com for the most up-to-date installation requirements.
Made with FlippingBook - Online Brochure Maker