HOW TO INSTALL HORIZONTAL FRAMELESS GLASS RAIL TREX SIGNATURE ® X-SERIES ™
NOTES: » PLEASE READ ALL INSTRUCTIONS BEFORE BEGINNING INSTALLATION. USE ALL REQUIRED PARTS WHERE SPECIFIED. » MUST USE 1/2" LAMINATED GLASS. SGP INTERLAYER IS RECOMMENDED. » FOR ORDERING 1/2" LAMINATED GLASS PANELS, GO TO GLASS.TREX.COM. FOR MORE INFORMATION, CALL 1-800-BUY-TREX. » X-SERIES FRAMELESS GLASS RAIL IS ONLY COMPATIBLE WITH X-SERIES ANCHOR POSTS. IT CANNOT BE USED WITH STANDARD SIGNATURE POSTS OR PRESSURE-TREATED POSTS/POST SLEEVES. » X-SERIES FRAMELESS GLASS RAIL IS DESIGNED TO BE INSTALLED AT A MAXIMUM CLEAR SPAN OF 6' BETWEEN X-SERIES ANCHOR POSTS. » X-SERIES FRAMELESS GLASS RAIL CANNOT BE USED WITH TRADITIONAL OR COCKTAIL DESIGNS. » NOT RECOMMENDED FOR STAIR APPLICATIONS. » REFER TO TREX CARE AND CLEANING GUIDE FOR DETAILED CLEANING RECOMMENDATIONS. » GLASS IS INTENDED TO BE INSTALLED FROM THE INSIDE OF THE DECK.
Tools Required: • Please wear safety glasses during installation. • Note that tools are NOT included unless otherwise specified. – Min 18V drill – Min 18V impact driver (post install only)
– Tape measure – 9/16” drill bit – 3/4” socket – Hammer – Level – Glass suction cups (for lifting and placing glass panel)
6' Horizontal Frameless Glass Rail Configuration » (2) X-Series Anchor Posts (sold separately) » (2) Rigid Gaskets
NOTE: Install X-Series Anchor Posts as per instructions provided with these posts. Then proceed to instructions below.
» (2) Flexible Gaskets » (2) Glass Edge Pads » (2) Bottom Glass Spacers » (2) Top Inserts
Cutting Rigid and Flexible Gaskets 1. Cut rigid and flexible
1
gaskets to the height of the glass being used.
LAMINATED GLASS PANEL DIMENSIONS » For 36" Height: 1/2" thick x 33” x 73.125” (12.7 mm x 838 mm x 1857 mm) » For 42" Height: 1/2" thick x 39” x 73.125” (12.7 mm x 991 mm x 1857 mm) IMPORTANT NOTE: IF NOT INSTALLING GLASS AT FULL 6' SPAN, MEASURE DISTANCE BETWEEN POSTS AND ADD 1.125".
.
X
X + 1.125" (28.6 mm)
218 NOTE: Construction methods are always improving. Please refer to www.trex.com for the most up-to-date installation requirements.
Made with FlippingBook - Online Brochure Maker