HOW TO INSTALL TREX® SOLAR POST CAP LIGHT
PARTS
HELPFUL TIPS
» Install the solar post cap in locations that receive the most amount of sunlight. » If the installation location experiences long periods of temperatures below 32°F (0°C) it is recommended to shut the post cap off to prolong the battery life. » Maintenance - Periodically clean the glass solar panel to be free of dust and debris for optimum charging performance using a water dampened cloth.
TOOLS NEEDED
CAUTION:
Polarity Key
Do not short the pins of the battery connector. Doing so will damage the battery and may cause it to overheat and burst. When installing a replacement battery the male and femnale connectors have a flat side that MUST MATCH UP for polarity. Do not force the connections together. Failure to match polarity will damage the controller board. Do not puncture or allow sharp objects to come into contact with the battery. Do not attempt removal of battery jacket. Do not dispose of battery in a fire. Do not attempt to alter or modify the battery from its original manufacture design. The battery is intended for use in the TREX Solar Post Cap any other use is prohibited and will void the warranty. Check local regulations for proper battery disposal. Keep out of reach of children.
22
NOTE: Construction methods are always improving. Please refer to www.trex.com for the most up-to-date installation requirements.
Made with FlippingBook - Online Brochure Maker