HOW TO INSTALL HORIZONTAL FRAMELESS GLASS RAIL/ CONTINUED TREX SIGNATURE ® X-SERIES ™
Installing Glass Panel
5
2
2
5. Using glass suction cups as per their instructions, pick up glass panel and install at an angle into the open channel of the first X-Series Anchor Post so that the glass rests on the glass edge pad. Then rotate glass panel into the opposite X-Series Anchor Post as shown. DO NOT LET GO OF THE GLASS!
TIP: For aesthetics, if glass safety marking is visible, install glass in such a manner that the location of the safety marking is consistent.
Outside
6
6. At both post locations, slide rigid gasket into X-Series Anchor Post as shown (ensuring the "J-hook" feature of the gasket is facing the OUTSIDE of the deck) until the gasket rests on top of the glass edge pad.
220 NOTE: Construction methods are always improving. Please refer to www.trex.com for the most up-to-date installation requirements.
Made with FlippingBook - Online Brochure Maker