HOW TO INSTALL CROWN AND UNIVERSAL BIRDSMOUTH HORIZONTAL RAILING/ CONTINUED TREX TRANSCEND ®
5
Attaching Top and Bottom RSBs 5. Attach RSBs with
Using Miter Box Saw to Cut Rails 1. Place 2 x 4 on edge behind the rail to allow for complete cut.
adapters to posts with wood screws (provided).
2. Angle blade to 45°. 3. Set stop on saw so blade travels half the depth of rails. Several test cuts can be made on scrap material to accurately set the stop. 4. “V” cut both sides of the rail.
(51 mm x 102 mm) 1 mm x 102 mm) x ( 02 ) (51 mm mm)
NOTES: » Drill at slight inward angle to drill holes on marks. » Lay cut lower rail into position on decking surface between the posts before attaching the lower RSB. There may be some difficulty attaching the lower rail if you fail to do this.
NOTE: Transcend's crown and universal rails will require different stop settings.
Installing Railings to RSB's 6. Attach with self-tapping screws (provided) .
6
233
NOTE: Construction methods are always improving. Please refer to www.trex.com for the most up-to-date installation requirements.
Made with FlippingBook - Online Brochure Maker