TREX TRANSCEND STAIR RAILING CONFIGURATIONS Note: See specific installation instructions for attachment of Trex Post Mounts or Trex Joist Mount Posts prior to installing any railing.
Standard
Cutting post sleeves is NOT required. A. Pressure-Treated post/Trex 4x4 or 6x6 post sleeve, Trex post mount/Trex 4x4 or 6x6 post sleeve, or Joist Mount Post/Trex 4x4 or 6x6 post sleeve (INSIDE MOUNT ONLY) B. Crown rail C. Universal bottom rail D. Trex balusters (must also use appropriate stair baluster spacer) See page 236 for “How to Install Standard Stair Railing”.
C
B
E
A
D
Post sleeves WILL NEED TO BE CUT. A. Pressure-treated post with Trex post sleeve NOTE: » Only for use with 4" x 4" (102 mm x 102 mm) post sleeve. » Trex post mounts cannot be used with Transcend cocktail design. B. Deck board top rail (1 x 6 or 2 x 6). NOTE: Enhance cannot be USED. C. Universal top rail D. Universal bottom rail E. Trex balusters (must also use appropriate stair baluster spacer) See page 240 for “How to Install Cocktail Stair Railing”. Cutting post sleeves is NOT required. Ensure both top and bottom post/post sleeves are tall enough to accommodate top rail and 2 x 4. A. Pressure-Treated post/Trex 4x4 or 6x6 post sleeve, Trex post mount/Trex 4x4 or 6x6 post sleeve, or Joist mount post/Trex 4x4 or 6x6 post sleeve (INSIDE MOUNT ONLY) B. 2 x 4 top rail C. Universal top rail D. Universal bottom rail E. Trex balusters (must also use appropriate stair baluster spacer) See page 241 for “How to Install Traditional Stair Railing”. POST SLEEVES WILL NEED TO BE CUT
Cocktail
C
B
E
D
A
Traditional
C
B
E
A
D
235
Made with FlippingBook - Online Brochure Maker