HOW TO INSTALL COCKTAIL STAIR RAILING CONTINUED TREX TRANSCEND 14
Attaching Top Post Cap and Foot Block 16. See instructions on page 239.
14. Slide baluster spacer up and snap into top rail. Installing Optional Gaskets 15. See instructions on page 239. NOTE: Top gaskets may have tobe trimmed to fit properly.
HOW TO INSTALL TRADITIONAL STAIR RAILING TREX TRANSCEND Installing Pressure-treated
Attaching Top Stair Rail 10. See instructions on page 239.
Posts, Post Sleeves, and Skirts 1. See instructions on page 236. Measuring and Cutting Bottom Stair Rail 2. See instructions on page 236. Marking Location for Foot Block on Bottom Rail
Attaching 2x4 to Top Stair Rail and Securing Balusters
11
3. See instructions on page 237. Attaching RSB’s for Bottom Stair Rail 4. See instructions on page 237. Attaching Bottom (Universal) Stair Rail 5. See instructions on page 238. IMPORTANT NOTE: REMEMBER TO INVERT UNIVERSAL TOP RAIL BEFORE MARKING AND CUTTING Measuring and cutting Top Stair Rail 6. See instructions on page 238. Measuring and Cutting 2x4
1
11. Pre-drill a pilot hole and toenail 2-1/2" (6.4 cm) composite deck screw at each end of 2 x 4 into post
12
on back side of stair rail (side not facing decking).
7
12. Secure 2x4 to
top(universal) rail from underside of rail into bottom of 2x4 with 1-5/8” pan-head screws (not provided) approximately every 16". NOTE: Balusters can be shifted out of the way if necessary. 13. Slide baluster spacer up and snap into top rail. Installing Optional Gaskets 14. See instructions on page 239. NOTE: top gaskets may have to
16" (41 cm)
13
7. Using the cut top rail as template, cut 2x4 at same angle and length of the top rail. Attaching RSB’s for Top Stair Rail 8. See instructions on page 239. Installing Inverted Top Baluster Spacer and Placing Balusters 9. See instructions on page 239. DO NOT SLIDE TOP BALUSTER INTO PLACE YET.
be trimmed to fit properly. Attaching Post Caps and Installing Foot Block 15. See instructions on page 239.
241
Made with FlippingBook - Online Brochure Maker