TREX SELECT ® CLASSIC HORIZONTAL RAILING RAILING CONFIGURATIONS
Cutting post sleeves is NOT required. A. P ressure-Treated post/Trex 4x4 or 6x6 post sleeve, Trex post mount/Trex 4x4 or 6x6 post sleeve, or joist mount post/Trex 4x4 or 6x6 post sleeve (INSIDE MOUNT ONLY). B. Select top rail C. Select bottom rail D. Select balusters See page 243 for “How to Install Standard Horizontal Railing”.
Standard
B
A
D
C
Post sleeves WILL NEED TO BE CUT . A. P ressure-treated post with Trex post sleeve NOTE:
POST SLEEVES WILL NEED TO BE CUT
Cocktail
B
C
» Only for use with 4" x 4" (102 mm x 102 mm) post sleeve. » Trex post mounts or joist mount posts cannot be Select cocktail design .
A
E
B. Deck board top rail. NOTES: » Enhance cannot be used
D
» Deck boards will need to be cut to fit each rail span
C. Select top rail D. Select bottom rail E. Select balusters See page 245 for “How to Install Cocktail Horizontal Railing”.
Cutting post sleeves is NOT required. A. P ressure-Treated post/Trex 4x4 or 6x6 post sleeve, Trex post mount/Trex 4x4 or 6x6 post sleeve, or joist mount post/Trex 4x4 or 6x6 post sleeve (INSIDE MOUNT ONLY). B. 2 x 4 lateral top rail C. Select top rail D. Select bottom rail E. Select balusters See page 247 for “How to Install Traditional Horizontal Railing”.
Traditional
B
C
A
E
D
242 NOTE: Construction methods are always improving. Please refer to www.trex.com for the most up-to-date installation requirements.
Made with FlippingBook - Online Brochure Maker