HOW TO PROGRAM DIMMER REMOTE
3
A. ALWAYS keep antenna fully extended for maximum range.
B. Up/Down arrows
gradually dim or brighten lighting.
A
C. On/Off button cycles lights ON/OFF.
D. Mode button cycles through 3 preset
3. Press and hold both the up and down arrow on the dimmer remote simultaneously.
dimming levels: High, Medium, Low, and Off.
4
B
NOTE: First, make sure the red light is illuminated on the remote. If there is no red light and the product is new, contact 1-800 BUY- TREX for a replacement. If the product is not new, the A27 battery is replaceable.
C
D
1
4. With the dimmer arrow buttons held down, plug the transformer back in. The lights should blink once to confirm programming. 5. Release the up and down arrows on the remote and test remote to confirm proper operation.
2
1. Install dimmer per
instructions and make sure lights are ON and working properly. 2. Unplug the transformer to turn lights OFF.
26 NOTE: Construction methods are always improving. Please refer to www.trex.com for the most up-to-date installation requirements.
Made with FlippingBook - Online Brochure Maker