HOW TO INSTALL 22.5˚ HORIZONTAL ANGLE RAILING TREX SELECT T-RAIL®
4 x 4 OR 6 x 6 Post Sleeve
NOTES: » Trex Select T-Rail brackets are designed to be installed at 22.5° angle only and only for horizontal applications. Ensure post placements are set to accommodate this angle so railing is install on flat side of post. » Brackets must be installed on rails first (see standard horizontal instructions for reference). » When installing railing to posts, the brackets may need to be located slightly off center (rails will be centered). Measure and mark first before attachment to rail to ensure railing are centered.
6 x 6 Post Sleeve
4 x 4 Post Sleeve
PARTS
Left T-Rail Angle Bracket
Right T-Rail Angle Bracket
1
Measure and Cutting Railings
1. Measure between the posts and cut both bottom rail and T-Rail to proper angles.
R
2. Attaching Foot Block to Bottom Rail and Adding Weep Holes See instructions on page 259.
L
3. Attaching Brackets to Railings See instructions on page 259
T-Rail(top view)
4. Assembling Railing Section See instructions on page 260.
5. Installing Railing Section to Posts See instructions on page 260.
Bottom Rail (top view)
6. Attaching Post Caps and Installing Foot Block See instructions on page 260.
261
NOTE: Construction methods are always improving. Please refer to www.trex.com for the most up-to-date installation requirements.
Made with FlippingBook - Online Brochure Maker