HOW TO INSTALL BIRDSMOUTH HORIZONTAL RAILING/ CONTINUED TREX SELECT T-RAIL®
7a
7c
Installing Railing Section to Posts 7a. Using scrap material (i.e. 2 x 4s, decking
boards,etc.) cut at least three support blocks at 3-3/4" in height. Place one each on decking surface beside each post and one near center of span.
3-3/4"
7c. Install both bottom and T-Rail Birdsmouth bracket post sleeve using four #9-16 x 1 3/4" screws (provided) per bracket. Note screws are installed on angle.
7b
8. Attaching Post Caps and Installing Foot Block See instructions on page 260.
7b. Lift secured railing section up above posts and slide down into position between posts.
NOTE: To help stabilize railing section use a quick-grip clamp (or other type of clamp) and clamp the first baluster to post sleeve. (DO NOT OVERTIGHTEN CLAMP.)
263
NOTE: Construction methods are always improving. Please refer to www.trex.com for the most up-to-date installation requirements.
Made with FlippingBook - Online Brochure Maker