HOW TO INSTALL HORIZONTAL MESH RAILING/ CONTINUED TREX SELECT ®
19
Installing Mesh Panel
19. S ecure top bracket to post using two wood #9-16 x 1 3/4" screws (provided) . IMPORTANT NOTE: SET DRILL TO LOW SPEED AND LOW CLUTCH SETTING WHEN INSTALLING THESE SCREWS. DO NOT USE IMPACT DRIVER.
17
Attaching Post Caps 20. S ecure post caps with
20
silicone or PVC adhesive (apply adhesive on the inside self-centering/ corner tabs).
NOTE: Clean up any excess adhesive before it dries .
17. Slide mesh panel down into side channels/side anti- rattle gaskets and fully seat into bottom channel/ anti-rattle gaskets. IMPORTANT NOTES: » ENSURE THAT THE NON-CUT SIDE OF THE MESH PANEL IS PLACED IN THE BOTTOM CHANNEL. » IF NECESSARY USE SOAPY WATER ON THE VERTICAL ANTI-RATTLE GASKETS TO ALLOW MESH PANEL TO SLIDE DOWN MORE EASILY.
Installing Top Rail onto Mesh Panel
18
18. .Place top rail assembly onto mesh rail, pressing d own top rail until brackets fully rest on side channels.
NOTE: Use a rubber mallet if required to fully seat top rail.
272
Made with FlippingBook - Online Brochure Maker