HOW TO INSTALL SELECT® ALUMINUM RAIL HORIZONTAL PANEL/ CONTINUED
Attaching Brackets if Using Pressure-Treated Posts with Select Composite Post Sleeves
Attaching Brackets if Using Pressure-Treated Posts with Select Aluminum Post Sleeves
1
1
Install 1-Piece Skirt and Post Sleeve 1. S lide 1-piece skirt down to rest on decking surface. Slide post sleeve
Install 1-Piece Skirt and Post Sleeve 1. S lide 1-piece skirt down to rest on decking surface. Slide post sleeve
over post and position inside post sleeve skirt.
over post and position inside post sleeve skirt.
3
2
2
3
33-9/16" (88.3 cm) or 39-9/16" (101.6 cm)
33-5/8" (85.4 cm) or 39-5/8" (100.1 cm)
2-5/16" (5.8 cm)
2-3/8" (6.0 cm)
2. Measure up from top of skirt 2 3/8". Mark with light line. 3. Measure up from top of skirt 33 5/8" for 36" rail height or 39 5/8" for 42" rail height. Mark with light line.
2. Measure up from top of skirt 2 5/16". Mark with light line. 3. Measure up from top of skirt 33 9/16" for 36" rail height or 39 9/16" for 42" rail height. Mark with light line.
4
5
4
5
4. Center lower bracket on post above the marked line and attach using two #10 X 1 3/4" stainless steel screws (included) . 5. C enter upper bracket on post above marked line and attach using four #10 X 1 3/4" stainless steel screws (included).
4. Center lower bracket on post above the marked line and attach using two #10 X 1 3/4" stainless steel screws (included). 5. C enter upper bracket on post above marked line and attach using four #10 X 1 3/4" stainless steel screws (included).
284
Made with FlippingBook - Online Brochure Maker