TREX ENHANCE ™ STEEL POSTS/ CONTINUED
7
4
7. Attach posts using four 1/2" x 6" (13 mm x
Blocking boards
152 mm) hex cap bolts, washers, and nuts, along on underside of blocking. (Always ensure to consult local code official for more information on IRC or IBC Compliance).
4. Install two 2 x 8 (51 mm x 203 mm) boards as blocking under post location. Securely attach blocking using a total of twenty-four 3" (76 mm) pressure- treated compatible screws (not provided) . NOTE: After all proper blocking has been installed for posts, decking can be installed per manufacturer's instructions.
5
6
5. U sing post a template, mark locations of holes. 6. Drill through decking and blocking boards using 9/16" diameter bit (long drill bit will be required).
295
Made with FlippingBook - Online Brochure Maker