HOW TO INSTALL ENHANCE STEEL RAIL HORIZONTAL PANEL/ CONTINUED
Attaching Brackets if Using Pressure-Treated Posts with Enhance Composite Post Sleeves
Attaching Brackets if using Pressure-Treated Posts with Transcend 4x4 Post Sleeves
1
1
Install 1-Piece Skirt and Post Sleeve 1. S lide 1-piece skirt down
1. Install post sleeve over pressure-treated post.
to rest on decking sur- face. Slide post sleeve over post and position inside post sleeve skirt.
2
2
3
3
2-1/4" (5.7 cm)
33-1/2" (88.3 cm) or 39-1/2" (101.6 cm)
34-13/16" (88.4 cm) or 40-13/16" (103.6 cm)
3-9/16" (9 cm)
2. Measure up from top of skirt 2 1/4". Mark with light line. 3. Measure up from top of skirt 34" for 36" rail height for 40" for 42" rail height. Mark with light line.
2. Measure up from top of decking surface 3 9/16". Mark with light line. 3. Measure up from top of decking surface 35 5/16" for 36" rail height or 41 5/16" for 42" rail height. Mark with light line.
5
4
5
4
4. Center lower bracket on post above the marked line and attach using two #10 x 2.5" high carbon steel coated black screws (not provided). 5. C enter upper bracket on post above marked line and attach using two #10 x 2.5" high carbon steel coated black screws (not provided) .
4. C enter lower bracket on post above the marked line and attach using two #10 x 2.5" high carbon steel coated black screws (not provided) . 5. Center upper bracket on post above marked line and attach using two #10 x 2.5" high carbon steel coated black screws (not provided) .
6
6. Snap two piece skirt over post sleeve.
297
Made with FlippingBook - Online Brochure Maker