HOW TO INSTALL ENHANCE STEEL RAIL HORIZONTAL PANEL/ CONTINUED Installing Panel to Brackets Attachment of Bracket Covers, Skirts, and Caps
5
3
6
1
1
5. G ently spread and then snap corresponding bracket covers over opening in upper and bottom rails. 6. Attach provided post skirt to bottom of post.
3. Place panel in bottom and top brackets.
7
7. A ttach post caps to posts (use of rubber mallet may be required for secure attachment).
4
4. A ttach panel rails to
brackets using one #12 x 3/4" self-drilling screw.
Note: Brackets are designed to allow screw on either side, customer may choose based on preference.
HOW TO INSTALL ENHANCE STEEL RAIL – COCKTAIL RAIL PANEL CONFIGURATIONS
» Trex Cocktail Rail brackets (sold separately) are for use with either Traditional or Cocktail designs. For a 6' section, use 4 brackets and screws provided, for 8' section, use 5 brackets and screws provided. » W hen installing Cocktail or Traditional railing configurations with Enhance Steel Posts, you MUST use taller posts. For 36" railing heights use 42" post, for 42" railing heights use 53" post. Failure to do this will not allow post caps to fit properly on posts due to insufficient clearance. » W hen using Enhance Steel Posts, these can be cut to desired heights once Cocktail or Traditional rail heights are established. Ensure to allow enough space for post cap to fit properly. » When using pressure-treated and post sleeve, post and post sleeve must be cut. » If using a one-piece skirt, ensure to attach this BEFORE attaching railing.
» IF USING PRESSURE-TREATED POSTS WITH POST SLEEVES, PLEASE REFER TO LOCAL BUILDING CODE REQUIREMENTS PRIOR TO ATTACHING PRESSURE- TREATED POSTS.
Cocktail Rail Panel with Enhance Steel Posts Configuration
299 NOTE: Construction methods are always improving. Please refer to www.trex.com for the most up-to-date installation requirements.
Made with FlippingBook - Online Brochure Maker